Robnbama
Well-known member
- Joined
- May 8, 2012
- Messages
- 57
- Reaction score
- 0
- Location
- Attalla, Alabama
- My Car
- 1973 Ford Mustang Mach one
Hey guys it’s been a while since I’ve posted. My Mustang project was put on hold for a few years and I just finally got started back on it. The good news is I got the engine running and boy it runs great. I’m having problems cranking the engine from the key switch. I can start the car by jumping the solenoid. I have a 460 with a C6 transmission. Have installed a new ignition switch, starter solenoid and cleaned the key cylinder. The previous owner had a manual transmission but I installed an automatic. Is there anyway I can bypass the safety neutral switch just to verify this is the problem? Once I know this is the problem then I will figure out how to install a working neutral safety switch. There are several wires on the driver side apron that seems to go nowhere. I believe one of these may be for the neutral safety switch. Any help would be greatly appreciated.