NEW WINDOW GUIDES / ANTI RATTLE CLIPS

[OMS]

Set of plastic window guides and anti rattle clips

38.95 shipped

http://www.ohiomustang.com/store/order_page.asp?itemid=3364

 

[Tegemus]

Thanks for the heads-up, Don. Bought 2 sets on your eBay site.

Barry

 

[BeerDontCount]

Thanks Don. Just ordered as well. How hard are these to install? Can you access by removing the interior door panel, or do I have to R&R?

Sent from my SM-G930V using Tapatalk

 

[OMS]

Thanks Don. Just ordered as well. How hard are these to install?  Can you access by removing the interior door panel, or do I have to R&R?

Sent from my SM-G930V using Tapatalk

On a 73 you have to fight it in the door.

In 73 the metal window plate is riveted to the glass [ 71-72 it was bolted ]

It is near impossible to get the window out without grinding off the rivets. So you can

separate the metal plate and remove the glass.

Take off your door panel and you can work thru the access hole

This WILL require beers and band aids though.

You can also clean up your plastic bits in the door and inspect them for cracks before you disassemble anything.

Then if the two main guides are OK, you can just replace the broken snap in clips.

 

[BeerDontCount]

Beer I have on hand, and like working on these cars in general I'm used to banging up my hands. Sounds like it's doable with some patience and persistence. Thanks for the advice

Sent from my SM-G930V using Tapatalk

 

[Carolina_Mountain_Mustangs]

Don,

You had told me they were coming. I am somewhat shocked at the price. When I was looking at doing the repo was thinking $10.00 for the set cost about $2.50 each to mold all four pieces in one shot. I should have done it for that kind of profit. Of course the mfg. makes some and you have to also.

I don't need any but lots of members were looking for  them about a year ago.

 

[will e]

Thanks Don for posting up. Going on my christmas list!