Parting out 72’ Sportsroof 2F02H100534 - Near Weed CA

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
Looking like I am going to end up with a ROUGH 72’ green on green sportsroof.  It took a hard hit on the front drivers side, then while being stored a storm blew over a tree onto it crushing the roof.

If you plan on passing by far Northern California get in touch.  Interior is in horrific condition as it has been open to the elements for over two decades.  Some glass and other bits are good.  Anything sportsroof specific I’d be happy to sell or donate- as my car is a coupe.  
 

Once I get it home and cleaned out a bit I‘ll post pics and prices.  Prices will be low, but I really don’t want to deal with packing and shipping anything larger than a bankers box.  Local pickup encouraged.

 

TheRktmn

VIP Members
Site Supporters
Joined
Jun 21, 2011
Messages
392
Reaction score
37
Location
Mills County, TX
My Car
69 Cougar XR7 460/C6
If it has warning lights or a clock I'd be interested in either of those.

 

72' Mach 1

Member
Joined
Jul 8, 2019
Messages
13
Reaction score
1
Location
Buffalo, NY
My Car
1972 Mustang Mach 1 H-code original paint
If it has the tach dash, I need the dash harness. Thanks 

 

73MustangCoupe

VIP Members
Joined
Jul 5, 2013
Messages
916
Reaction score
152
Location
Jonesborough, TN
My Car
1973 Mustang Mach 1
I'm looking for left front and right rear splash shields, and front spindles for a front disc brake car, if you've got them and can spare them.

 

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
I’ll have some time Friday to pick through the car.  Here it is in all of its glory.    

D24C791A-972F-47C0-87CC-03FBC5FF756E.png

 

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
Floor pans are toast, rear quarters have rust / trunk drops / trunk floor is toast.  

I found the horns in the trunk and will give them a test beep.  
 

0754CE2F-53B5-4F58-9CC8-5220F20D2747.jpeg

67F39C74-E359-4AEC-95FD-00AE46C252D9.jpeg

82A6DBF6-9047-48B0-A8D9-642758813059.jpeg

C8655A7C-00E8-425C-B788-72ED7C496AE6.jpeg

 

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
@MikeGriese I’ll check the horns tomorrow.  If the low works $15+ shipping?

@TheRktmn

The instrument cluster is CRUSTY as the windshield had been out of the car for a decade- and it has been outside.  Still want it?  Free plus you pay shipping.

@73MustangCoupe

No left front splash shield, it must have been damaged in the wreck.  The right rear splash shield is nice ($20 + shipping) It is a disk brake car, but I am not sure I would trust the drivers side spindle as it may be tweaked from when the car was wrecked.   I want to keep the spindles on the car for a bit so it rolls.  That being said I have a buddy In town who has a pair of disk brake spindles off a 73 that wasn’t wrecked.  I can check with him if you are interested.
 

 

TheRktmn

VIP Members
Site Supporters
Joined
Jun 21, 2011
Messages
392
Reaction score
37
Location
Mills County, TX
My Car
69 Cougar XR7 460/C6
@TheRktmn

The instrument cluster is CRUSTY as the windshield had been out of the car for a decade- and it has been outside.  Still want it?  Free plus you pay shipping.
Sure do.  All I need is the warning light assembly but if it's easier to send the whole thing that's fine too. 

These pics are a clock, but they show the backing plate and front faceplate that I need.

M7123SC-back.jpg

M7123SC-front.jpg

 

73MustangCoupe

VIP Members
Joined
Jul 5, 2013
Messages
916
Reaction score
152
Location
Jonesborough, TN
My Car
1973 Mustang Mach 1
I've got another lead on the splash shields, but the spindles I definitely need. If you can check with your buddy with the front spindles that woule be much appreciated.

 

Hemikiller

VIP Members
Joined
Jul 12, 2010
Messages
3,305
Reaction score
497
Location
Killingworth, CT
My Car
71 Mach 1
65 coupe
Looks like a factory radiator, if the upper bracket has a stamped part #, it might be worthwhile for someone to recore for a concours car.

 

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
@MikeGriese

The low note horn does not work.  I grabbed it out of the trunk and it was sitting bracket down.  The back is pretty badly corroded.  I’d call it junk.  Sorry!

@TheRktmn

I pulled out the warning light assembly.  The plastic is fine, the steel face is pretty crusty.  Want me to pack it up and get it to Texas?

@92GTS-R

Drivers door shell is what I would call very good.  Pretty straight Seems solid, has a huge amount of broken glass and Wasp nests inside.  I poked around and while it is rusty in the bottom it is NOT rotten.  Looks like it would clean up with a dip or blast without any holes.  See pics.
 

@73MustangCoupe

I got ahold of my buddy that has the spindles- they are complete with calipers and hubs / rotors.  I would consider the rotors scrap.  The calipers are a wildcard on if they are rebuildable or not. Splash shields are bent from rough handling.  It will be at least a week until I can get my hands on them (he is working the fires). Do you need just the bare spindles?

I swapped wheels on my parts car today and I got to take a close look at the drivers side.  Whatever it hit was hard enough to break the rotor, confirming the spindle isn’t fit for service.  The passenger side rear splash shield is good, but a little eroded where it touches the fender.  If you end up needing it get in touch.
 

@Hemikiller

I’ll have to take a closer look at the radiator.  Today I noticed that one of the tanks got tweaked when it was wrecked.  It is covered in ring tail cat poo so I have been avoiding it.

C633BDAC-C0AC-458A-9AEC-35A1B8E1EEF2.jpeg

F9C38785-4076-4230-93D9-A6EEBC133B70.jpeg

E7E0693A-BA94-4076-989E-005B70940419.jpeg

6F808FD5-3744-43E1-A81B-FC9D3F123423.jpeg

C5A53A1F-A0C6-44CF-8580-509782B562D5.jpeg

 
Last edited by a moderator:

Bentworker

VIP Members
Joined
Jan 17, 2015
Messages
1,465
Reaction score
179
Location
California
My Car
71' Grande project.
Pretty decent front Passenger side fender.  Needs some metalwork where the front bumper tweaked it.  No rot.  $150 pickup only.
 

Rear extensions- small gouge in the drivers side.  $40 each or $70 for the pair plus shipping.

standard rear valance.  $60 almost perfect, needs very little bodywork- no rot. 
Pickup only.

Front inner fender splash shields.  Condition fair.  Passenger front, Passenger rear, Drivers front.  
$15 each- or $40 for all.

Located within 20 minutes of Weed CA.

A8D06A88-4B4D-48FA-8951-AA41CA250F52.jpeg

8836F000-0B4E-43AF-A5E9-D7BD5C5CC0D2.jpeg

D18E35BA-B600-448D-B48F-4B36A7605FCB.jpeg

5DF62746-84AF-4148-8797-E70F0389A1F7.jpeg

399BFEB9-AC95-437B-8985-0EFA5860D80F.jpeg

2797E10E-9CD9-485E-A441-7BD420D9DBEA.jpeg

EE63ECB6-15BA-474B-B0BE-6EAC263F5401.jpeg

24515FBB-32A9-40E3-8281-4A65CD43ACC5.jpeg

11C460A0-3817-437D-8764-EF81A1D9E508.jpeg

D52CDC0F-3DA9-45BE-80A0-76136C0D962F.jpeg

 
Top