Radiator support wiring clips - Where do they go?

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bdennis

Well-known member
Joined
Apr 3, 2021
Messages
229
Reaction score
110
Location
Melbourne, Australia
Hey guys,
Not long ago I removed the grill, bumper, stone tray and head light assemblies to clean up the parts and repaint the parts and radiator support panel.
My Mach1 is a fairly original, unmolested car and I like to put things back to the correct place or put things right.
20221230_152829 (Large).jpg

When I removed the wiring and clips so I could paint the radiator support, I remembered where the long black wiring clips go but I don't recall where the smaller clips go.
Can someone advise where these should go and what part of the wiring to the front lights they should hold down? I have 4 of them. Per the pic below, the black one is for reference from a wiring tiedown clip kit I have.

20230305_152530 (Large).jpg

20230305_152554 (Large).jpg20230305_152606 (Large).jpg

Im confident that the black loop one is in the right spot, but I believe the yellow one is not in the correct place?
20230305_152622 (Large).jpg20230305_152633 (Large).jpg20230305_152639 (Large).jpg


Any info / help would be appreciated.
 
If it isn't a concours car, I'd put them where I felt they were needed. The old clip/strap type are likely broken anyway. You can replace those easily enough. I wouldn't overthink that stuff.
 
Back
Top