1hotboss
Well-known member
Had Bob do my OEM tach...but I am a little confused on the re-install wiring. I am a newbee to all this. So I have made a jumper wire and have that in place...I understand that I will have to lengthen the green wire and attach it to the negative side of the coil.
Now here is were I am confused....1) where do I ground with the black wire
and 2) how do I splice in the red wire to the 12V on ignition switch.
Help please thanks
Now here is were I am confused....1) where do I ground with the black wire
and 2) how do I splice in the red wire to the 12V on ignition switch.
Help please thanks