Seam Sealer

blkulis

VIP Members
Joined
Oct 2, 2012
Messages
215
Reaction score
12
Location
Arkansas
My Car
1972 Ford Mustang Convertible
I am getting ready to paint my engine bay. I need to know where the factory seam sealer was applied in the engine bay and cowl area. I scraped off some hardened seam sealer in the cowl drip rail area, so that one is obvious. Any links or advice would be helpful.

 

MotoArts

Well-known member
Joined
May 30, 2011
Messages
935
Reaction score
6
Location
Pittsburgh, PA
My Car
'71 Sportsroof
'90 Mustang 7-Up 5.0 ragtop (sold after 20 years)
'66 Sunbeam Tiger Mk.IA
I think that's the only place.

Nothing forward of the firewall.

 

Qcode351mach

VIP Members
Joined
Dec 24, 2010
Messages
2,888
Reaction score
43
Location
U.S.A.
My Car
1972 Q code Mach 4spd
2004 350z
2005 Corvette
1971 Camaro SS/RS
I am getting ready to paint my engine bay. I need to know where the factory seam sealer was applied in the engine bay and cowl area. I scraped off some hardened seam sealer in the cowl drip rail area, so that one is obvious. Any links or advice would be helpful.
The car I'm doing now had the entire flat area of the cowl drip area done plus the frt edge..also the joint of the rear fender aprons to the firewall all the way down to where the frame rail,firewall & apron meet..you can see in the pics I'm starting to mask for application of the 2 component seam sealer

101_0456.JPG 101_0457.JPG

 
Top