Seam Sealer

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 2, 2012
Messages
257
Reaction score
35
Location
Arkansas
My Car
1972 Ford Mustang Convertible
I am getting ready to paint my engine bay. I need to know where the factory seam sealer was applied in the engine bay and cowl area. I scraped off some hardened seam sealer in the cowl drip rail area, so that one is obvious. Any links or advice would be helpful.

 
I think that's the only place.

Nothing forward of the firewall.

 
I am getting ready to paint my engine bay. I need to know where the factory seam sealer was applied in the engine bay and cowl area. I scraped off some hardened seam sealer in the cowl drip rail area, so that one is obvious. Any links or advice would be helpful.
The car I'm doing now had the entire flat area of the cowl drip area done plus the frt edge..also the joint of the rear fender aprons to the firewall all the way down to where the frame rail,firewall & apron meet..you can see in the pics I'm starting to mask for application of the 2 component seam sealer

101_0456.JPG101_0457.JPG

 
Back
Top