Taillight to body gasket: Which way do I put on?

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

luxstang

Well-known member
Joined
Dec 23, 2010
Messages
6,624
Reaction score
101
Location
Luxembourg / Europe
My Car
1972 Mustang Convertible
Hi guys,

I got a question concerning the gaskets sealing the body to the taillight housing.

Which side goes to the body and which side is the one that goes to the housing?

Here are some pics.

First one is a top view:

img_0546 (Geändert in GIMP Image Editor).jpg

This is one side reading "DC":

img_0545 (Geändert in GIMP Image Editor).jpg

This is the other side with no markings whatsoever:

img_0540 (Geändert in GIMP Image Editor).jpg

My guess would be the "DC"-side is the body side, but my guesses have so often been wrong in the past, that I'm open to suggestions! ;)

 
Hi guys,

I got a question concerning the gaskets sealing the body to the taillight housing.

Which side goes to the body and which side is the one that goes to the housing?

Here are some pics.

First one is a top view:

This is one side reading "DC":

This is the other side with no markings whatsoever:

My guess would be the "DC"-side is the body side, but my guesses have so often been wrong in the past, that I'm open to suggestions! ;)
Mike the smooth side goes against the body panel
 
Was there used any kind of sealer on the gaskets at the factory?

 
Back
Top