torque converter

Help Support 7173Mustangs.com:

SPAIN72MUSTANG

Well-known member
Joined
Sep 9, 2011
Messages
376
Reaction score
1
Location
chicago ridge,il
My Car
1972 mustang convertible
2008 ford edge
2006 cadillac cts
i need help with what size torque converter to get i know what stall size i need i just need to know does our car take a 26 spline,pan filled or case filled and the bolt size for our cars thanks for any help.ron

 

piper62j

Well-known member
Joined
Jul 6, 2014
Messages
333
Reaction score
7
Location
34613
My Car
1973 Q-Code Mach 1. Full restoration in progress.
What transmission is in the car?

 

c9zx

VIP Members
Joined
Sep 30, 2010
Messages
5,345
Reaction score
273
Location
Mustang, OK.
My Car
1972 Mach 1 Q code
2007 GT
1969 Cougar Eliminator B302
CSX 7000 Shelby Cobra FIA
2020 Edge ST
2002 F250 V10
If it is a 70-79 trans, it should be 26 spline, 1.375 pilot. Chuck

 

SPAIN72MUSTANG

Well-known member
Joined
Sep 9, 2011
Messages
376
Reaction score
1
Location
chicago ridge,il
My Car
1972 mustang convertible
2008 ford edge
2006 cadillac cts
thanks c9zx dont want to get the wrong one and than have to wait to return it so thanks for the good advice.RON

 

turtle5353

VIP Members
Joined
May 15, 2011
Messages
3,420
Reaction score
248
Location
PA
My Car
1971 Mach 1 Mustang
+1 on what chuck said, I believe the earlier ones are a 24 spline. I found out the hard way. ordered for newer trans and it didn't fit. Mine must of come from an earlier pre 69 version. The older mustangs called them selecto-shift and they had a green dot for drive on the shifter housing.

 

SPAIN72MUSTANG

Well-known member
Joined
Sep 9, 2011
Messages
376
Reaction score
1
Location
chicago ridge,il
My Car
1972 mustang convertible
2008 ford edge
2006 cadillac cts
can anyone tell me if I need a 10.5 or 11'' torque converter

 
Last edited by a moderator:
Top