torque converter

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SPAIN72MUSTANG

Well-known member
Joined
Sep 9, 2011
Messages
376
Reaction score
1
Location
chicago ridge,il
My Car
1972 mustang convertible
2008 ford edge
2006 cadillac cts
i need help with what size torque converter to get i know what stall size i need i just need to know does our car take a 26 spline,pan filled or case filled and the bolt size for our cars thanks for any help.ron

 
What transmission is in the car?

 
thanks c9zx dont want to get the wrong one and than have to wait to return it so thanks for the good advice.RON

 
+1 on what chuck said, I believe the earlier ones are a 24 spline. I found out the hard way. ordered for newer trans and it didn't fit. Mine must of come from an earlier pre 69 version. The older mustangs called them selecto-shift and they had a green dot for drive on the shifter housing.

 
can anyone tell me if I need a 10.5 or 11'' torque converter

 
Last edited by a moderator:
Back
Top