Search
Current Forum Topics
- What did you do today instead of working on your Mustang?For me I am waiting on the 71/72 weld / sealant book to show up. No book = no seam sealer going on the car yet. So instead of working on the Mustang I decided to work on my daily driver project instead. Master cylinder was leaking on the diesel 83' GMC 4x4. In the process of […]
- One fuse not getting power?I have a problem on my 73. The fuses for the dash lights is not getting power. I tried to hot wire that terminal with a fused wire temporarily to see if I would get dash lights and I didn't. Any ideas on how I can fix this ?
- Hello, new member from NW Ohio. 73 convertible.
- vent duct tipsI have a 73 Mach w/o a/c and I am in the process of putting a switch on the parking brake and found that the easiest way was to remove the outside air vent duct to gain access to the side of the parking brake. That being said as you may know it is not […]
- Rear seat removalForum members, wanting to pull the carpet to put some soundproofing and some speaker, wires, etc., Can anyone give me the key to lifting out the lower seat cushion on a 73 convertible? Thanks.
- Kill switch system? Your thoughts?I found this on amazon.com and thinking of getting it, https://www.amazon.com/Knoweasy-Bat...16-98e3-62dd6a771724&pd_rd_i=B0CC5NCPFC&psc=1 Any one try it? Any issues? Any other suggestions? My... Read more
- Owned for 37 years and getting ready to pass it down.After 37 years wife and I will be passing down our little girl. Our son will be so happy.
- Ram Air vacuum actuatorsWhere is a good source for ram air actuators? I have hear of using the actuators off of the air cleaner intake snorkel, but I don’t want to buy one just for the actuator. I have one, but it doesn’t hold vacuum. I did a search but didn’t have much luck. TIA Kevin
- Body side moldingI have a question , does anyone know where I can get the passenger side molding ( see picture of drivers side ) it is bolted on . I will take used or new
- 351 4v ( 408 and TKX )Look what I picked up this weekend for Free. Last week I went to a Christmas party. Ended up talking to this guy mike. We were talking about Fords. He told me about his 69 Bronco he built. I started to tell him about my Mach1. He asked what motor it has. I told a […]
- Dash removal...assistance please? Seats?Hi Folks, I've checked threads on here and haven't found what to some of you I hope, may be a simple answer. But I have removed the eight screws that go up into the dash, (six screws three on each side of the dash and the two screws in the center) – to try to […]
- CJ Torque Converter - FOUND!Hello all! Been awhile since I posted anything. I'm trying to source a torque converter for my 351C-4V, C6 combo with the D1ZZ-6375-C flex plate (has the 9.25" bolt circle which is often claimed to be 9.5" bolt circle). I understand this would have been the high-stall TC with part number D2OZ-7902-A. (Many write this […]
- Carrying on a tradition.Been lurking on the forum for quite a while now, finally have a reason to participate! My name is Heather and I have a 1973 Mach 1 Q code 4 speed, inherited from my grandpa. He bought this car when I was about 5 years old (I’m 26 now). Took me to every local car […]
- Shout out to Motorcity MustangOrdered a few items from Mike over the past couple weeks and things went exactly as they should. Items arrived packaged VERY well and as described.
- Rear Power Window socket wiringDoes anyone have a picture of the rear power window socket wiring for a 71? The two rear power windows will go down, but will not go up. All the wiring diagrams I have researched do not match the wiring of the socket and I just can’t understand why a previous owner would change the […]