Parts For Sale 71-73 interior, exterior and chassis/ under hood parts

[MITCH351]

First picture is of interior (other than seats and console) parts I have left. AC vents $25 each, AC/heater controls $75 each, steering column round sleeve with retainer clip $40, parking brake $40, pedal pads $20 each, gas pedal bright metal trim $15 each, deluxe door panel chrome door latch handles, $15 each, Mach 1 rear side panels $75 each, Mach 1 rear side window trim $50 each, rear ash trays $50 for the nicest, $40 each for the next to nicest, black auto shifters, $40-60 each depending on condition, glove box plastic front edging $25, glove box rear owner card clip $15, speedometer used with tach $80, locking type glove box latch (no key) $15, dash support brackets $15 each.

Second picture is of exterior parts, mostly for 73s. 71-73 NOS tail light gasket $25, 73 NOS grill side trim, $40 for the pair, 73 NOS signal front turn signal light assembly $90, 73 nice used front signal lights $40 each, 73 rear bumper urethane body fillers $40 each, very nice 73 rear bumper guards with rubber $75 for the pair, 73 rear bumper mounting brackets w/edge trim $50 for the pair, 73 rear bumper mounting bracket edge trim set of 4 $25, 71/72 license lamp gas shield $25 each, nice gas cap $30, rear honey comb panel (no cracks) $50, rear honey comb bright trim (driver quality) $20 each, antenna fender gasket and bright cover $20

Third picture is of various miscellaneous items. Rear sway bar "U" brackets $25 set, rear sway bar below leaf spring brackets $50 pair, Mach 1 square wire hood hinge springs $80 pair, Mach 1 dual exhaust rear tie down brackets with mounting hardware $75, AC vacuum canister $30, heater hose on-off vacuum control valve $15, cowl cover grills $25 each, 72/73 351 Q code 4 speed emission control valves 2 NOS $75 each, 2 used $35 each, AC fire wall gasket $25, differential pinion rubber bumper $25, headlight buckets $15 each, head light stainless retainer rings $15 each.

Package pricing deals when buying more than 1 item, shipping extra. Private message me on item(s) of interest. I have still more items not listed here, inquire if you don't see something you might need.

View attachment 65573View attachment 65574View attachment 65575

Doug - Thanks for your post - I am looking for the channels that attach under the drip rail mouldings - both sides.

 

[Steve73QMach1]

Are there still two accelerator pedal bright trim pieces left? If so, I would like both. Shipping to 43023. Thanks.

 

[robnlean]

First picture is of interior (other than seats and console) parts I have left. AC vents $25 each, AC/heater controls $75 each, steering column round sleeve with retainer clip $40, parking brake $40, pedal pads $20 each, gas pedal bright metal trim $15 each, deluxe door panel chrome door latch handles, $15 each, Mach 1 rear side panels $75 each, Mach 1 rear side window trim $50 each, rear ash trays $50 for the nicest, $40 each for the next to nicest, black auto shifters, $40-60 each depending on condition, glove box plastic front edging $25, glove box rear owner card clip $15, speedometer used with tach $80, locking type glove box latch (no key) $15, dash support brackets $15 each.

Hi Doug. I know you posted this a while back, but do you still have the rear ash trays? I am a buyer for the nicest one. Thanks

 

[Billw69]

I’m looking for that intake manifold vacuum hose fitting if you still have it available?

Thanks

 

[arnie427]

Is the Speedo and tach still available??

 

[Motorcity Mustang]

Doug - Thanks for your post - I am looking for the channels that attach under the drip rail mouldings - both sides.

If Doug does not have those, let me know. But he gets first dibs since this is his posting.

 

[Doug's 73 Mach1]

Is the Speedo and tach still available??

Sent you a private message on this Tuesday. Don't know if you received it. Speedo sold but I do have a working tach.

 

[Charlie71]

Bill, no interior rear view mirror, but driver door racing mirrors, remote control type also a passenger racing mirror also with remote control. I have a couple antennas, one is a 73, the other I will need to check but it would be missing the little ball at the top.

Doug, I'm interested in the passenger racing mirror also with remote control if it will fit a 71' 63R

 

[Doug's 73 Mach1]

I have the passenger remote control mechanism but not the mirror body. The mechanism including the mirror itself can be fitted to a 71-73 passenger racing mirror body.
I don't have the bezel for the remote control joy stick, but it is the same as that for a driver remote mirror.
You will need to drill/cut holes in the door and perhaps passenger "A" pillar to route the remote cable into the interior. And also in the dash to mount the joy stick

Can sent pics if still interested.

Doug

 

[Doug's 73 Mach1]

Here are some photos, turns out I have the joystick bezel.

 

[Charlie71]

Hi Doug,
Not being greatly familiar with the passenger remote mirror, I assumed that it would mount just as the drivers door does and dint realize that the joystick is located on the dash. Can you help me out and LMK where the joystick is located on the dash?
What is your price?
Thanks,
Charlie

 

[Doug's 73 Mach1]

Charlie, when I installed one on my Mach 1, I located the joy stick below the wiper switch and Cigar lighter area facing downward out of the dash. Inconspicuous, but adjustable while sitting in the driver seat. I will take some photos and post later.

 

[Doug's 73 Mach1]

Here are some photos of one installed.

 

[Sheriff41]

Here are some photos of one installed.

View attachment 88907View attachment 88908View attachment 88909

Nice installation, Doug. I've been holding onto a passenger remote mirror off a Ranchero for years wondering how to best install it. Now I know!

How well does your microphone work mounted that low?

 

[Doug's 73 Mach1]

Chuck, hard to tell with the mic. haven't made or taken any calls while driving. It is wired to the radio/CD/ blue tooth system installed. I listen to music via CDs or Blue tooth when driving. I only drive it occasionally, short trips for 15-20 minutes.
I got the remote mirror out of a mid 70s Pinto, they used the same shaped racing mirrors on sporty models as 71-73 Stangs.
Doug

 

[Charlie71]

Hey Doug,
Very nice install and thanks for the tip on finding a housing, I didn't know about the pinto compatibility.
LMK how much you want for everything, either on this post or a PM.
Thanks,