Tesla80

yup mine is the same as that and that verifies that I have the coupler on the gear correctly Thanks!

I just checked the Lares web site that makes the steering gear and they say it uses the 201 coupler which is the one that I am using. So...

Do you still have this for sale by chance ? I would not mine having a spare. Thanks !

Yeah I did pull the bolt and slide it forward but then I could not get the bolt back in to secure the rag joint to the gear shaft. I...

I do still have the old one and it looks the same this is the one that I got. LARES 807 Remanufactured Info w/ Power Steering; Fast...

I replaced my entire steering gear. Once I removed the 4 bolts I also removed the three bolt that hold the grommet thing through the...

Well with some gentle prying i got it to move a few millimeters. Still not close enough. I think I am going to pull the column back out...

I think when I put the column back in maybe I clipped the fire wall abs the column collapsed but I am not sure. I am going to try some...

I know what bolts you mean. I have them in but loose. I will give that a try. Worst case I can pull the column out of the car and see if...

It does not seem to budge at all. I was doing some reading is there a bolt at the bottom of the column that needs removed to get the...

ok cool I will do down to the garage and see if i can get it extended. Thanks !

The rag joint or the column ? Thanks !

So I dropped the column today to install the new rag joint onto the steering box. That is done. When I went to put the column back in...

Yup that is what i am going to do tomorrow. Use an long extension from the top of the engine bay since the long tubes are in the way to...

I do not have to worry about getting it off the box. I have a new arm and a new box. How does one use that tool you listed to remove the...