I mounted the same type of overflow tank in the same position. I did not like the way that it stood out. I took it back out, roughed up the shiny finish with Scotch Brite and painted the tank with a rattle can to match the semi gloss black paint in front. The only thing I did not paint was the...
I have been working there since June. House finally sold in California. I put my car on the Reliable Transport truck this morning. Back to work next week.
I have read somewhere to use a hot soldering iron to poke through the carpet and existing floor pan hole. Feel for the floor pan hole on top of the carpet and poke the soldering iron through the carpet and hole. It is supposed to leave a nice clean hole in the carpet. My friend tried it on his...
I installed the complete Ram Air setup that I bought from Ohio Mustang Supply 2-3 years ago. It fit fine and the flappers still work well. Just be careful when attaching the vacuum hoses to the flapper's vacuum actuators, don't use too much force. The nipple is just pressed into the vacuum...
I am also planning on installing the LED lights when I take my dash apart to fix my clock. I am still trying to figure out what color bulbs to get in order to keep the stock green look.
1. Install green 5X LED's and remove the diffusers?
2. Install white 5X LED's and keep the diffusers?
Does...
I have a stock 351c 4V with a cast iron stock 4V intake and A C6. I changed from the stock Autolite 4300 carburetor to a 670 Holley Street Avenger. I have had the Holley on for more than 2 years. Right out of the box with no jet changes, it has been running flawlessly and with no leaks. It...