Recent content by Mikesro

I tried to find new one to purchase, but could only find the Fastback roof available anywhere. Junkyard roofs for the Grande Coupe may be just as bad or worse than your own IF you can even find one. Custom metalwork and repairs may be the only way to go but also are VERY expensive. Get ready...

I was kinda forced into a roof/rear deck paint modification. Not ready to paint the entire car right now and the vinyl top was long gone. Roof and trunk had damage that needed to be repaired. So I went with a blacktop option in the interim. I am going to install the rear window chrome again...

235/60R17

I used 17's from a 2014 Mustang with a 1.5" hub spacer on all 4. Working well with good clearance front and rear.

My 73 Grande Project

Someone sent me this 73 paint code chart a few weeks ago.   I was trying to figure out my Data Plate 6B color code which says Lt Yellow Gold.  But current car color today is more like 6D or 6E.   Must be a color change repaint but I dont see any evidence. MIKE SRO

Thanks Rackerm!  That is great info.  Mike SRO

Well - I found my very faint Data Plate but I am wondering....What color is 6B ?  See picture below - Sure looks like 6B.  Not really looking like 6E but car is kind of medium yellow. Not really Bright yellow.  Or do I have a 6C orig car with incorrect code if that's possible.  Any...

I am looking for my 1973 Mustang Grande Data Plate.  Where is that usually found on the car?   Unfortunately, Mine may be missing.

I saw your photo (apparently) of the 3 cars on a different thread in the Grande section under "Hockey Stripes on a Grande?"  I just cropped it to the smaller single car photo for my post about the Spring Special.  Thanks for the info.  MIKE SRO

Here's the old girl just grinnin' in the driveway! She finally gave up the fight on that hammered dash pad and she knows the new "dress" is coming soon! :)

FOLLOW UP.  The Dash Pad and Top Metal are finally out. There are 2 phillips screws on the TOP of the dash just behind the front pad lip, those were missed. I thought the 2 screws mentioned were in the top of the Center Dash Bezel which also need to be removed. Didn't need a ton of pull force...

Thanks for the info MIKE SRO