Recent content by Ogoz23

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. O

    Only getting 8 volts to gauges

    Thank you guys , what I did for now , I taped into a 12 volt wire with the ignition on. Took me the whole day !
  2. O

    Only getting 8 volts to gauges

    Ok , you just scared me now lol... This is what I have ...the wires thAt are lable I. I'm Guessing the previous owner meant ignition, are connected to that switch on the original picture. now that wire was reading max 10 volts .... I have 2 other wires where not connected ... So I disconnected...
  3. O

    Only getting 8 volts to gauges

    But the other ones have 12 volts even with the key off the ignition
  4. O

    Only getting 8 volts to gauges

    Hi guys , the power wire that powers my gauges , ( oil, volts, water temp) are only getting 8-9 volts, the rest of the car has 12 volts .. Therefore my volt gauge is reading 8 volts .. The pic shows where I tapped in to, to get power to the gauges when the key is on run.. Any ideas? (Picture...
  5. O

    Neutral safety switch ( can you adjust?)

    Guys thank you so much , that fixed the issue , my switch for some reason,the paper clip did not go in Further as I rotated the switch , but I kept rotating the switch till it cranked on parked .
  6. O

    Neutral safety switch ( can you adjust?)

    Ok I think I got it ,this link is for an f150 , let me know if the basics are the same. Maybe it can help someone else I'm guessing the only difference is that I would have to insert a #43 drill bit before turning left or right ?
  7. O

    Neutral safety switch ( can you adjust?)

    Great , now do I have to disconnect anything from the switch , or I can leave everything in place
  8. O

    Neutral safety switch ( can you adjust?)

    Yea I read them but couldn't find on how to adjust , just says you need a #43 drill bit
  9. O

    Neutral safety switch ( can you adjust?)

    Hey guys , well I had my transmission resealed, and now the car will not start while it's on park , but if I move the shifter in the in Between park and reverse it will start, also the reverse lights come on in Between drive and reverse ... Now when in in between I don't mean the shift indicator...
  10. O

    What's the widest tire

    Any pictures on the 315 on the back, would love to see ::thumb::
  11. O

    AC blower(only top vent)

    Wow this is a lot of help , thank you so much
  12. O

    AC blower(only top vent)

    Is this the pump your talking about ?
  13. O

    Hello everyone !!

    Mustang Dynesty , I'll work on it , I'll try to get you his info. All ready told a buddy of mind
  14. O

    Hello everyone !!

    Thank you guys !
  15. O

    AC blower(only top vent)

    Ok I see this is going to be a month project ... I'll start Behind the dash
See more
Back
Top