Recent content by srrodder

More power to everyone doing extensive restorations. I did the same on a 1969 GT. I recently bought a 1971 M-code Mach 1 that is 99% rust free and with original paint and interior. I have taken the interior out to check for rust and found none, and I have used a bore scope to check the inside of...

Does anyone know what the difference is between the Saginaw power steering gear boxes tagged SPA AE that were used starting 1/2/73 and those used earlier tagged SPA S or U?

I meant to say 4V open chamber heads not 2V heads.

To wrap this up, I tracked down and talked to the engine rebuilder. He said the heads were the same and were closed chamber heads. I found on another thread that a 4* head would be an open chamber head if cast beginning in January 1971. Since my Mach 1 was assembled in October 1970 it couldn't...

Thanks for the info - I'll at least take a look at the date codes. It will be a few days and maybe a week before I can get to this, so a reply post may be a little late.

I recently initiated a thread regarding Ignition Timing Settings and received a number of great posts in reply. Today I took a close look at the markings on the heads of my 1971 M code engine and find that apparently one is an open chamber 4V head and the other is a closed chamber 4V head. This...

Thanks for the info - all great stuff.

Thanks, and warm - I wish.

Glad you like them. I have fun with each one.

Glad you like them, I certainly do.

That is the article, glad you like the car.

And here is my '69 GT:

Here is my '71 Mach 1:

Again thanks for all the help. I won't be doing any tuning until the weather warms as I live in the cold East and my car storage is unheated. I wanted to gather all the good info I could to be ready for tuning. Based on your comments, I may switch to an MSD system as I don't want to struggle to...

Many thanks to all who posted replies. The info should be very helpful in setting up the ignition system (and carb). In response to questions - the distributor is stock, but I will soon be installing a Pertronix Plug n Play distributor with an Ignitor III system and with an adjustable vacuum can...