I'm about 99% sure the MM and frame perches are different.. The T-bird uses the wider mounts that were in LTD and other large corp cars. I'm putting a 70 LTD motor in mine and have ran into this issue myself. Basically, the LTD type mount is wider f-r by about 1" and are offset too much to put...
429=460 Police Interceptor High flow manifolds. No cracks or repairs. Perfect for Mustangs, Galaxie, Cougar and everything else with a tight fit. Has the steering gear notch for Mustangs. As far as I can tell they are basically the same as the D1ZE-9431-CA2 71 Mustang 429 CJ 4V manifolds with...
OK, I'm confused now. I'm putting a 429 in a 351C car. The 429 mounts on the engine are 1pc each side , 3 bolts to engine requiring 4 1/2" perch width. The perches on the car are 3 1/2" wide which I believe require the 2pc mounts that attach to block with only two bolts. The service manual is...
71-72. I'm not looking for the rubber mounts. I need the frame perches, supposedly they allow the engine to sit 1/2" lower (any V8) for convertible? I cant verify that.
Also looking for 429/460 engine mounting brackets that the rubber mounts attach to on the block. I can buy them new for about...
Let me know what you have (Private MSG please) with shipping to 37743. I need the lower sitting convertible frame perches (Engine Mounts).
I need the 429 brackets that attach to the block. [block plates]
Also, I have parts to trade if you need something for your build.
Tim
CJ Pony here in the US has their New Vintage units on sale for $510 usd.
https://www.cjponyparts.com/new-vintage-usa-gauge-kit-performance-series-electronic-speedometer-1971-1973/p/IBK714-V/
Not sure if they have the international units on sale.
I've not used them but they look nice.
Just want to reiterate what OZ stated. The 170 d angles are not correct. I'm working on installing mine and the width offset is about 4" making to plan st 170. It should be 2". Fit before welding. It appears the vertical is correct.