will e's latest activity

Handsome car. The black top looks good and I love the wheels for your car.

As some of you know I was insistent on installing a Monte Carlo Bar on my car, so I had by builder custom make one. As promised I am...

Yes it is the factory one. I did as you suggested. I set the initial at 730 RPm’s to 8 BTDC and checked it with out vacuum advance. At...

That's a little high but not excessive. As soon as you goose the throttle the vacuum advance drops as well as with any decent load on...

Getting the carb back to 'stock' is a solid plan. The car should run pretty well in that configuration. If it doesn't then you can...

Even in primer these cars look bad ass!

Remember you'd walk into the local parts store and they'd have a basket of 'Cherry Bomb' mufflers. The good old days. I sport a...

You actually supported them? Overacheiver. Mine dangled free for at least a year. At that point there was no packing material left. Ah...

Asking as you have some tube off the manifolds supported by a coat hanger you could drive 50 miles Hell I drove a week with glass packs...

Greetings. To be clear, the engine will not crank with the key turned to start but will crank if you provide battery power to the S post...

While not crazy that's a fairly stout cam. And the rest of your build, including tranny/converter/gears, would indicate the college...

I wonder what the factory used? I am pretty sure the light didn't stay on if the passenger didn't fasten their seat belt. I always...

New wheels and tires for the '71 Mach 1... Went with 235/60R15s on the front and 255/60R15s on the back

The one you posted is "10 second delay before switching On". He wants it on for 10 second and then have it turn off.

Hello from Phoenix. I am excited you've got a younger person wanting to carry on with these cars.