well you could but you still gotta plug that hole. i suppose you could go the cheap way and tap a pipe thread in it and just plug it, and later on just thread a small piece of pipe in there to connect your hose. cheapo way!
351m and 351c motor mounts wayy different.
plus 351m shares same bell bolt pattern as the 400 which is also the same as the 429/460. 351c shares the 289/302/351w bell bolt pattern and motor mounts.
if you would be lucky enough to actually find one in the yard you most likely will destroy it trying to remove it. im sure someone is reproducing it but im not sure who exactly. im sure someone has run across this issue and will chime in to heip ya out.
Hello all, guys what are you using for seam sealer, all the sealer in my car is brittle so im digging it all out and of course found some small holes along the way. any rec on what types of sealer your using would be very helpful, and do they offer it in different colors? thanks!
Hey thanks guys lots of good info! my dislike of frame connectors came from owning foxbodies and after installing frame ties and still as one poster said you jack the car up and see the body still twist like a pretzel. i figured a bigger car makes the problem even worse. i do like the idea of...
this is a large reason for me hanging onto my 71 coupe, ive seen a bunch of these cars and realized just how well equipped my coupe was. m code 351 4v, c-6 trans, power disc brakes. tach and guages, full length console with clock, a/c. 9" rear. however it had about the ugliest green color...
Hello everyone, got a question concerning subframe connectors, im currently installing new floor pans and the car has a 4 point roll bar installed however theres no frame ties. now im not keen on the bolt in style (if there are any even) nor the weld ins. has anyone built there own frame...
Hello everyone here are some pics of my coupe. its a slow work in progress. its a 71 m-code grande coupe, factory ps, pb, ac, c6 trans. has fact tach and guages and full length console. next to tackle is the passenger floor, drivers side is done.
Hello all! new member from pa figured id introduce myself and get aquainted with everyone. ive recently started a ground up resto on my 71 m-code coupe that ive owned since high school, ill get pics up pronto but ill warn ya shes in pieces! ill also be adding pics as i go. ive seen a lot of good...