Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. G

    Temp and oil sending units??

    Me sensitive.....I'm not the one griping about someone else's choices. You asked me why we weren't swapping in a Coyote, I gave you the reasons and you didn't like it. Get over it, it's not your car! 1. I did not post the choice of engine for the swap until asked by another member, I should...
  2. G

    Temp and oil sending units??

    Only 300hp stock?? Sorry, that's just not true........the '98 LS f-body cars actually dyno over 300 at the tires.......not that difficult or expensive to make more power than the Coyote. By the time the tuner gets finished with it, it will be making 375+ at the crank and a cam and spring change...
  3. G

    Temp and oil sending units??

    A coyote swap requires cutting out the shock towers which we do not want to do. An LS swap does not require any permanent changes to the car. The real question should be, why did Ford build such an oversized, underpowered turd like the Coyote?? I mean, really, it's wider than a Boss 429 and...
  4. G

    Temp and oil sending units??

    Doing an engine swap on my sons '73 and I need a smaller sending unit that will work with the water temp gauge.......could also use a smaller oil pressure sending unit for the same car. The engine going in the car has a 12mm thread where the water temp sender goes into the head. I can use the...
  5. G

    Edelbrock or stock heads?

    Go with aluminum heads.....theoretically, you can run more compression with aluminum and the Edelbrock heads should flow better than refurbished factory heads.
  6. G

    Best hydraulic clutch master cylinder solution??

    I'm still waiting for a reply from Apex but a new and maybe better idea has entered the picture! A buddy called yesterday and asked if I could come by his shop and help for a few minutes. I was walking through his shop and noticed a clutch/brake pedal assembly laying in the floor and asked him...
  7. G

    Best hydraulic clutch master cylinder solution??

    Thanks to everyone who has replied so far......I have learned more in this thread than in all the searching I did before I made the original post. Hopefully anyone and everyone with additional information will jump into the discussion. Just sent an e-mail to Apex to see if they have any good...
  8. G

    Best hydraulic clutch master cylinder solution??

    Sorry, no extra points, that's not your photo!  :D
  9. G

    Best hydraulic clutch master cylinder solution??

    Thanks Go Time! Chuck I did a search for Tilton 6000 and it came up as a hydraulic throw out bearing??
  10. G

    Best hydraulic clutch master cylinder solution??

    Spent quite a bit of time searching past threads here and anything I could find on the net....thought I'd ask to see if there is any updated info out there?? If you are using a hydraulic clutch master cylinder, I'd appreciate info on whether you are using a kit or a home brew and the...
  11. G

    Dynacorn 71-73 convertible quarter panels??

    Not yet. I would have already ordered them, but they are for my son's car and he is the one who has to pay for them! We will be doing other things to the car until he can afford to buy the quarters.
  12. G

    Dynacorn 71-73 convertible quarter panels??

    Thanks, looks pretty good!!
  13. G

    Dynacorn 71-73 convertible quarter panels??

    Well, that's more info than I had, thanks!! Do the body lines look right?? Are marker light holes in the right place?? Where did you buy yours?? Can you post a photo of the top of the quarter?
  14. G

    Dynacorn 71-73 convertible quarter panels??

    Has anyone used the 71-73 convertible full quarter panels from dynacorn?? Just wondering about the quality and how well they fit??
  15. G

    LS swap?

    I am in the process of putting an LS1 and T56 in my '68 camaro. As soon as that project is on the road, my son and I will be parting out a '98 z28 convertible and putting the LS1 and T56 in his 73 Mustang convertible. We considered a cleveland or windsor, but we looked at cost of building an...
  16. G

    Need some quick clutch pedal help/expertise

    Thanks for the response, I did some additional research and actually talked to the guy that wrote the Boss 351 book.....looks like I can probably relocate the brake rod pin in the manual brake pedal and use it.
  17. G

    Need some quick clutch pedal help/expertise

    Thanks for the info, but we won't be using a cable clutch on this one. We will be using the pedal and building a hydraulic clutch conversion for a T56. My question concerns the brake pedal, not the clutch pedal. My son's car has power disc brakes, the clutch pedal assembly I found is from a...
  18. G

    Need some quick clutch pedal help/expertise

    I have the chance to purchase a clutch/brake pedal assembly for my son's '73 convertible and I need some expertise. I need some quick help/info because it's located 2 hours away and I will look at the assembly as I pass through the area tomorrow. The assembly is out of a 71 or 72 6 cylinder...
  19. G

    Two old buddies and a Boss 351 on Power Tour

    Ray Ron's coupe is getting a 454ci windsor, a Silver Sport 5 speed and full Gateway suspension......should be a fun ride!!
Back
Top