Search results

I am still looking for a decent set of white own deluxe door panels, half thinking of going full retro I’d and having shop create something

Lol. Vanity plate - DeathCar?

My engine is a mild rebuild (just under 400hp, cc heads, blue thunder manifold) came with the external oil line to the rear and I run a hv pump. Also like the Shelby’s I put 6 quarts in the stock pan

Let’s get a coffee one afternoon

Welcome great looking car. So, finding myself unable to avoid the low hanging fruit, when you go on vacation, is your away message Death takes a holiday?

Where in LI? I'm in Huntington

I am having an issue with th emergency v brake light. When the e brake is set does the switch ground the bulb (meaning the positive to the bulb is always hot or does the switch send positive to the bulb (and the socket is always grounded)? When I used a test light to known ground the tester...

https://www.steeda.com/steeda-mustang-shifter-handle-offset-bracket-555-7070.html

Second in line on the round belts light

Installed the steeda block today, solved both problems. The stick now sits comfortably in my hand and no longer pops out of 5th.

Sorry was out of town on federal case, money sent

sold pm me payment instructions Shipping address is Richard Rosenthal, 21 Longwood Drive, Huntington Station, NY 11746

No, used my original, I believe it is simply not as strong as the oem motors (though I will try reversing polarity) Wondering if anyplace can replace the bearing at a reasonable cost, in the meantime looking for a good used motor

how is the blower motor? mine dies (bearing) and the repop is too weak to do any good. If it's good, how much to 11746?

Steeda makes one, $20 plus shipping. Only moves it back a little over an inch but that may be enough to solve the problem

how thick is the stock and do you know the dimensions of the block and the distance between the holes? Sorry to seem so clueless, but I will need to find a shop to fabricate it. Simply out of my pay grade and skill set (and I have a healthy fear of anything I try to fabricate coming apart at...

Someone wrote about building an adapter block to move the shift handle on a t5 conversion back to the correct location. If anyone has made these and would sell one I would be grateful. Currently the rubber boot seems to d wet enough pressure on the stick to force it out of 5th while driving...

So, I backed up into a post and screwed up the rear bumper. I’m not sure if it was original or repopulate, but thin and weak it was. Any suggestions about which are strongest? I was thinking or welding a piece of rebar between the mounts behind the bumper,any thoughts, suggestions? If anyone...

we are swapping the internet gear from 7 tooth to 6 which will allow me to get an outer gear that works with the 4.11 rear.

While swapping pumpkins from 3.25 to 4.11 gears we discovered the speedo cable outer cover was quite frayed (I', surprised the shop that did the T5 swap for my toploader didn't mention it). Does anyone know who makes a new speedo cable that fits properly? (or has a good used oem one they will...