Search results

Thanks guys for your help. No wonder I did not recognise where it went, it does not match the replacement set I bought 4 years ago from CJ Ponyparts. They are much thinner than the original ones I took off 17 years ago. The thin one on the right is the replacement for the larger one thats in the...

Hi, thanks for your reply, where abouts are these weatherstrippings located exactly?

Hi all. I am just putting my finishing touches on my 17 year resto project on a 73 Mach 1 Fastback, and just finishing off laying a new carpet, seat belts etc. I have these 2 panels, and I cannot remember where they actually fit. I'm sure they are interior bits. They measure 42 inches long and...

Hi Chuck. Excellent instructions. Now my wipers are set perfect now. Many thanks for helping me out, much appreciated.

Thanks Chuck for the info. Unfortunately its a bit distorted, but I got the jist of it. Am I right in saying that the wiper blade arm "holder " can be pulled off the shaft, which is probably splined? I have a photo of the "holder" which has a cross on the top. Does this pull off the drive shaft?

Hi All. Almost finished my 17 year Mach1 fastback project and I have just fitting new windscreen wiper arms and I have noticed that the drivers side wiper arm is out of position, compared with the passenger side. I'm sure their supposed to be flush below the hood when in the off position. The...

He He. V-driven propeller is the ONLY way to get the job done. V-driven propeller is the ONLY way to get the job done. V-driven propeller is the ONLY way to get the job done.V-driven propeller is the ONLY way to get the job done

Spike, that is one serious drag speed boat, a Blown Hemi of all things. impressive or what. Is this engine driving a water jet turbine or impeller?

Spike, have you got a photo of your Drag Boat, I'm intrigued to see what it looks like.

Spike, thanks so much for this info, and it makes sense to let the spark plug condition tell me what's happening inside the engine. Really appreciate your knowledge on blown engines.

Hi Spike. Thank you so much for all of this info. I know fully understand where you are coming from. Its been 17 years since I last had this engine up and running on the road and its all beginning to come back to me...

I have 2 x 4 barrel Holley 600cfm vacuum secondary carbs sitting on top of this GMC 671 blower, how would I go about balancing the vacuum on both carbs? On the top of the carbs there is a vacuum diagraph with a small tail piece coming out of the top that a 2mm bore pipe could be attached to...

When rebuilding my dash board, I found it was very very hard to clip in a brand new speedo cable in the back of the speedometer because of limited space and my very big hands. As the car was already raised on axle stands, I removed the speedo cable from the gearbox. This gave me a lot more...

Thanks Chuck, and here's a photo of the Blown motor that now sits in the Fastback. PS. The Blowers belt tensioner pulley is on the wrong side, it should be on the left, silly me.

So sorry for your loss, I hope it can be fixed, but at least your ok. This is my biggest fear of someone smashing up your prized possession.

Just completed my Blown 73 Mach1 Fastback

Don. Thanks for the interesting article covering the 71 -73 Mustangs.

Hi everyone. I have been following this forum for some time while I have been restoring my 1973 Mustang 351c Mach1 Fastback, its not all 73 original, but I have added in some of my own twists that makes this Mustang a bit unique, and she is Supercharged. Some of you guys may not like it, but...

Whats wrong with the ones in the photo, they look pretty good to me, better than my ones that I am selling

Hi there. I have 2 of these, 1 x L/H and 1 x R/H side. They are second hand ones rescued from some fenders I had, and they have been sandblasted and painted in a red oxide paint to stop them from rusting up. They are both up for sale on Ebay UK site. I am based in the UK