Search results

Congrats! With that rear brake, it'll make right turns easy! That car is similarly equipped to our 73 Q code Mach I. Welcome from Texas!

Bad dimmer switch. It routes the headlight power from the main headlight switch, thru the dimmer switch to high or low beam headlights.

Pull a valve cover and look for valve stem seals. Either there are none, umbrella seals of the seals aren't on the guides but rode up the stems. Shop probably knurled the guides, which is only a temporary, cheap fix. Old school cheap way.

Welcome back, Lux! Glad to hear from you again!

Why is the arm of the brake pedal and the e-brake rusty?? Attention to detail? Not in my opinion. Nice build, but not my preference. I think the builder saw a cash opportunity and convinced her to dump a pile into it.. Whoever made the video is amateur and the company owner constantly...

Amazon The Stop Shop Stainless Steel Fuel Line Coil Roll 5/16 Inch,16 Feet With 4 Steel SAE 5/16" Fittings Included, Made in USA https://a.co/d/7eqpT1K

Welcome from Texas!

Welcome from Texas!

Welcome from Texas!

Make sure to have a drain pan under the tail shaft of the transmission and have the rear axle height elevated as transmission fluid may tend to drip out the tail shaft if level is full.

Not on my 3 - 1973 cars. 2 Mach I's with C6 have transmission mounted switch and also our 1973 convertible with 352C and C6

Is a free tetanus shot included?

You have your answers above. You have to measure the stroke of the pistons/crank. And get the engine casting codes above the starter if the 302C block used a different casting than the 351C. That one I'm not sure of.

Look up Chockostang. He rebuilds and improves the steering gearboxes better than new and can upgrade it with quicker steering ratio if so desired.

W.A.P.O.S.

large tie-wrap connecting both clamps together, perpendicular to them.

Beautiful work so far. Inspiration to get back to work on my cars.

Those that complain about the pricing have never known nor understood what an investment of time, money and energy it takes to bring a product from concept to drawing to prototype, find suppliers for material and find a vendor willing to produce something to your specifications while paying...

I believe it's for both. It does say "Kit". That would imply 2.

I just received an email this morning from NPD stating they have the Ram Air correct flat springs reproduced and available now! https://www.npdlink.com/product/spring-hood-hinge/205419?backurl=search%2Fproducts%3Fsearch_terms%3D16789-5A%26top_parent%3D200001%26year%3D No affiliation with NPD...