Search results

Good buy !!!! Thanks, Jay

GM, I have a shroud from my 73 in NJ, if your interested that waqs for a 351C no air. Let me know..... Thanks, Jay

In NJ winter has typically ended the last 10 yrs in late April or early May and we have not had much if any spring to speak of. We go from mid 40's to 90 very quickly !!! With me its not of matter of if I'm going to leave to a warmer climate but when...... Thanks, Jay

David, Your car looks great for sure. You should be very proud of what you have accomplished in such a short time....... Looking forward to additional photos. I am sure you had a few back in the day moments flash through your mind while firing it up. Congratulations on making your goals...

PM Sent.....

I paid $350 to install front and rear covers, I supplied the new foam for the front and used the original rear foam. I hd them back in a couple days and I finished other things. I would suggest having a profesional complete this work, you will be pleased with the results..... Thanks, Jay

I just rewelded the right side of my rear end this winter. Mine was a crack due to a misalignment of the housing pieces at the factory back in the day. It was located at about 3 o’clock at the center and I believe there is many out there that have the same issue. I actually sent the time and...

? Thanks, Jay

150 mile one at mecum auction last year with window sticker and all the most original ? Thanks, Jay

Another thought would be to use a product from Eastwood or POR 15 and follow the manufacturers directions. Thanks, Jay

Just a thought, is the air cleaner 429 specific or the standard 351 Ram Air type ? I believe the 429 type, which are not reproduced and are very difficult to obtain. Your only option maybe to modify your present unit. Thanks, Jay.

SEM makes the texture paint that David is refering to. Thanks, Jay

Looks Great !!!!!

+1 on Green Brake Clean. Stay away from the Walmart brand, its junk...... By the way my mach's rear end was all gummed up and once I cleaned it, the weld around the pumpkin housing was bad, looked to be missed or just caught the edge at the factory and cracked. I repaired, welded and tested...

Guys, Doing a gear change, rear end housing weld repair and general clean up under the back end. I purchased a used rear sway bar and want to install. Would anyone have a few photos of plates installed by leaf springs, my units are all painted and I cannot figure out which one goes where...

Kevin, Is that single stage paint ? You should be proud of how you have transformed that mustang, it is a beautiful. The owner should be estastic !!! I have a buddy that helped me with my Mach 1 and he charges by the hour also. You need to give yourself at least a $20.00 per hour...

Guys, The only thing I can add is the 429 ram air cleaner has a much different offset than the 351C type.I am not sure if they are different in height. Finding one for a 71 429 mustang is very difficult and costly. Thanks, Jay

I have been successful using testors model paint, rustolemum and my favorite is SEM Trim black after a through cleaning & prep. Thanks, Jay

Guys, I have 235's on the front with 15 x 7 rims and they are a little bulgy for my taste. I also run 255's on the rear on 15 x 8 rims and they fit perfectly. Thanks, Jay

A fellow car buddy had one of the Borgenson units listed installed in his 69 Mach and it was easy to install and made a huge difference in the drivability. I would highly recommend this swap to anyone who wants to drive there car..... Thanks, Jay