Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. O

    Parts Wanted Steel rims with hubcaps and beauty rings

    Ok. Unfortunately work is a little slow right now, so if your not in a big hurry, I will check in in a couple weeks and see if these are still available. Don't hold them on my behalf. I will let you know as soon as I know when I can come up with the money. Thanks!!
  2. O

    Parts Wanted Steel rims with hubcaps and beauty rings

    Were you selling the rims and hubcap/beauty rings together? What city do you live in?
  3. O

    Parts Wanted Steel rims with hubcaps and beauty rings

    72MustangSprin, are all they beauty rings the same depth and in decent shape? My dad lives in Selmer TN and may be able to pick these up for me. Can you send me a couple pics?
  4. O

    Looking for the Spring Clips on the key cylinder.-

    I was not able to find any when I needed in the Open market, so I called a local junk yard, had them take some out of a ford truck and ship them to me. But it cost $45 after shipping. Good Luck!! PS: you might have better luck than me finding them!! Try Ebay!
  5. O

    1962 Galaxie 500 4 door survivor (Any Interest?)

    My father has a 1962 Galaxie 500 4 door in good shape down in Tennessee. The motor is disassembled, but block is still in the car. Has original A/C unit still. No break through rust, and has original interior. He has purchased a few new parts including tires. Has a complete 352 to go with it...
  6. O

    Rear window frame is gone. How to replace/fix?

    This is the video I was talking about!! Good find!!
  7. O

    Rear window frame is gone. How to replace/fix?

    I think the first option to consider would be a donor car window rail. Otherwise, just a lot of patience forming and duplicating what is there. It may seem daunting, but if you do small sections at a time and work your way around you will eventually get there. Just don't settle on good enough...
  8. O

    Rim blow restoration advise request

    I had the same issue, believe it or not the emblem will go in, you just have to give it a bit of gusto. It almost feels wrong but mine did go in. Maybe a little heat from heat gun but don't over do it. Good luck!!
  9. O

    1973 front bumper repair

    I saw that NOS one on ebay. I've been thinking about it. Mine only has two tears that take off from the end bolts on the bottom on both sides, only about 4-6 inches long. I'm just worried about trying to glue the loose parts down to a rusty surface. I will look into 3M and others. I just don't...
  10. O

    1973 front bumper repair

    I tried searching for someone who has posted a beginning to end bumper resto for a 73 front bumper and couldn't find much. The one Mustang&Fords article link is not complete whenever I search for it. I have a couple small tears on the bottom of course, need to know how to repair and glue down...
  11. O

    Free Karma parts 2

    I will take the brake pedal pad!! Just let me know your Paypal handle!
  12. O

    One pic shot :-)

    Love the red/black!!
  13. O

    ISO Dual support brackets 1971 Mustang Grande

    The aftermarket grilles have provisions to mount both setups.
  14. O

    ISO Dual support brackets 1971 Mustang Grande

    I don't think you need the dual setup, mine has the later single support bracket and works fine. I think the dual would be harder to find and more expensive. Good luck!
  15. O

    1973 manual trans starter?

    Thanks!!! I was able to find one at the local NAPA! I am just going with an OEM style. Nothing special. Thanks Gents!
  16. O

    All 3 ponies in one post!

    They are stored near Selmer, outside of Jackson.
  17. O

    1973 manual trans starter?

    Does anybody know which starter a 1973 Mach 1 351 Cleveland with 4 speed would need? I do know it's a 164 tooth flywheel. Thanks!!
  18. O

    All 3 ponies in one post!

    I just wanted to get a post out with pics of all 3 of my babies. One lives in Minnesota with me (Boss 351 clone), and 2 are stored at my fathers in Tennessee. (73 Mach 1's) The Boss clone has a 351 CC head engine, RPM Air-Gap and custom Carb. The Brown one is a mostly stock Q code with A/C, and...
  19. O

    Parts Wanted Looking for rear valance no exhaust cutouts

    Hey gents! Looking for a decent rear valance for a 73 if anybody has one. PM me if so. Thanks!
  20. O

    Woodgrain Vinyl Film

    I like the 7024 version best.
Back
Top