Search results

Well the good news is about pancake Motors I spent a couple weeks researching them mine were just completely shot but I rebuild them and they are strong and fast so if anybody needs them rebuilt I have the knowledge LOL

I love these cars and I will be acquiring more and more parts so please just if you're looking for something let me know I'm not trying to get rich off of I'm just doing what I love and somehow I can make it pay the bills I'll be in heaven LOL thanks guys

I have a ton of parts 470-1373 Mustangs including Fastback and Coupe I have the complete roof and beautiful shape for the Grande two sets of front disc brake spindles rotors all that good stuff I have to manual windows with the regulators also two sets of manual window roll down assemblies that...

Looking for a working driver side pancake motor for my 1971 Mach 1 thank you

I just cut up a 73 Fastback with good trunk corners I've already cut them out PM me I'll send you pictures of what I have

Wanted 71-72 rear power window switch bezels and ash try with lid for the rear also I need the Deluxe seat belt warning light on the dash next to the headlight switch attached is a picture of the location of the light 732-737-1269 shipped zip 32164 Thanks

They're listed on eBay the site has a hard time letting me upload them the passenger side Green Tinted door glass would be good for a daily driver I also have the complete regulator rubber boot window switch motor all Hardware to install it and it has the door speaker option plug as well again...

Mustang console 

So it is the defroster definitely never seen one of these before I'll be cleaning it up I'm posting it on ebay lol I'm taking the roof its just a shell someone tubbed the rear and ran subframe connectors under it through the floor pans the shock towers in the front area are in very nice...

I have a 73 fastback I'm taking the roof off but looking at your pics of the rear X brace and all that looks like those need to be replaced the ones in the shell I just purchased are in very nice shape let me know if you want better pictures and if there's anything else you may need

I have a set of ginger mach 1 Deluxe door panels these were for power windows the wood grains in nice shape as well as the chrome trim the bottom there are cracks on the armrests areas I also have untinted power window front door glass and one passenger tinted power window glass also passenger...

Just picked up a 1973 Mustang shell for some sheet metal I need for my 71 M code I noticed a blower on the rear deck it doesn't have the fold down it looks like it could be a rear defrost any input would be appreciated thank you

Hey guys, just wanted to chime in with little bit of personal experience. I installed a TKO 600 and my dada golden glow 72 Mach 1 a couple years ago after installing it I realized had to go with a different clutch so I went with the Center force dual friction set up it was pretty much a direct...

I have this unit as well it's near the other vacuum canister on the passenger shock tower area this particular bracket is in the shape of a half moon and it sits above the exhaust manifold towards towards the rear of the engine not beside it I'll take a picture of it and post it when I get home...

The blue canister is there behind the passenger shock tower so thats good, there's also a bracket just above the passenger side exhaust manifold that looks like it held some sort of canister most likely for emissions of course at some point in time but it is now missing. Thank you I will get in...

Thank you for the compliment on my Car I appreciate it . when I got the Marty report I almost fell on the floor lol the reason for going for a 71 was so that I didn't have to worry about all this nonsense but I have to put it back to factory from what I gather this is the system that ran off of...

:DMy car still boasts the original paint and interior it's full numbers matching I'm stumped on this emissions system any pictures or input would be much appreciated thank you Marti report.pdf