Search results

I got one made of Polyurethan instead, better roadfeel they say :)

I used, I also haive 1 inch lowering springs in front and stock rear leaf springs with Energy suspension shackels.

Hi Has anyone replaced the rag joint with a U-joint like the Borgeson type ? Does it forwards vibrations ? I looked at some hotrods the other the other day and all of them had no rag joints and a lot of U jonts to clear headers etc. regards Rob

Single

I used the energy suspension for my 351c and 73. I just relocated the frame mounts with some steel plate and it works perfect.

Got some autostyle seats in, I think its a good match for modern seats in old car.

If you use a 255LPH pump with an Fuelregulator 0-90 psi and a returnline it can be set up to handle booth carb and EFI. If anybody thinking of going to EFi, forget the Sniper and go for the Terminator X :)

Hi Ive been running the Holey Terminator X TBI for 3 years, runs great. Easy installation and looks just like a carb. With the dualsync dizzy its a good combo.

I used a hydraulic RAM heavy Duty clutch, with Malwood all in one pedal assembly.

https://7173mustangs.com/threads/4r70w-is-going-out-tko500-is-going-in.40010/post-417891 Some info :-)

I have SPC upper controm arm tires are 235/45/18 no rubs at all.

Here is the finished product, Boxed all around and 1 9/16 bushing from Energy suspension. The old shell is welded in. Polybushing are wrapped in telefon tape before putting them in. Steps: Press out the old Bushing with shell Drill out and press out the center of the bushing leaving the edges...

Yes My thought to, Well Il go hunting for some others. I think the 1 9/16 are the correct ones

Hi I thought of changing the lower control arms, and box the new ones. Also I would like to get some poly bushings in. I bought what I thought was right but this is the fitment. The shell is from the old arm. Will It compress and work when torqued down ? I think there is to much play. The...

Thanks all for great comments :-) The microfiber towels worked hard to dry her in the garage.

thanks, but the gas in Sweden is ridiculous expensive :)

Here is a clip from the dashcam. The sound on the mic is not so good when recording. Its very smal acceleration :)

Warming up with the new exhaust :)

No but I used to work in construction 30 years ago :)