Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="71Rustang" data-source="post: 454616" data-attributes="member: 896"><p>Hi everyone,it's been a while. So here's what been going on. Long story short I acquired a 70 front sway bar with Kar Kraft clevis ends for heim joints and it also came with the KK ball style frame mounts for a 1 1/8 bar. So I bought a bar for a 71,cut off the ends from the 70 bar set it all up on the car a plug welded them on the 71 bar. Then I tackled the oil pan,I decided to go with a Aviaid pan instead of the Robbins pan I have as I would have had to modify that pan so much to make it fit it wouldn't have resembled the pan it used to be anymore. The Aviaid pan fit pretty well,I just had to notch out and fill in where the big ends of the inner tie rods want to be in the same place as the pan. I also bought a seat,a tubing bender and 140 ft of DOM tube.........more to follow</p></blockquote><p></p>