Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
You might be better off renting the equipment you need. A decent blaster, compressor, dryer, spray gun will cost a small fortune.For smaller jobs, I will use a 375 CFM, IR, mobile compressor. For blasting car panels, I use a 300lb cap. vapor blaster. And for spray guns, either Devilbiss MBC with a fine needle and seat. Or a binks Finish Line.I've never liked soda blasting. It takes forever, to get anywhere, with it. Walnut shells are much quicker, and wont damage your panels. Dry abrasives are my favorite. You really need to know what you are doing so you don't warp anything though.So depending on, how much time and money, you are willing to invest. Search out every possible avenue.
You might be better off renting the equipment you need. A decent blaster, compressor, dryer, spray gun will cost a small fortune.
For smaller jobs, I will use a 375 CFM, IR, mobile compressor. For blasting car panels, I use a 300lb cap. vapor blaster. And for spray guns, either Devilbiss MBC with a fine needle and seat. Or a binks Finish Line.
I've never liked soda blasting. It takes forever, to get anywhere, with it. Walnut shells are much quicker, and wont damage your panels. Dry abrasives are my favorite. You really need to know what you are doing so you don't warp anything though.
So depending on, how much time and money, you are willing to invest. Search out every possible avenue.
