Reply to thread

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ripper679, no not difficult at all, remove the nut from one side, i believe

right hand side and rethread onto the opposite side to pull the stud out and tap on the stub to remove. when done simply reverse the procedure.

You may want to mark your orientation of the stud ends, cannot remember

if the stud is a simple pinch bolt or if there is a collar on it, marking one end would make it foolproof in any case.

Boilermaster


Back
Top