TommyK

I never ran without them so I have nothing to compare them to. Reports from engine builders on the 460 board say the FPA mid-length...

Not sure I would run those as is. It would be a bad day if a piece of that old epoxy breaks off and gets sucked into a cylinder.

The gear ratios are almost identical between the FMX and T400. A stock trac-loc is more than adequate for street use. For a stock or...

Might want to take a look at the fuel tank vent line that connects to the charcoal canister as well.

I agree that it will probably be fine but new control arms are pretty cheap and readily available. Just for piece of mind you might want...