Don C's latest activity

I agree with others. Too much risk for an electronic device of unknown quality to control the entire electrical system. There are other...

There have been several discussions about seat belts. Here's one example, by searching the forum you will find more...

I decided I would start a thread for my Mustang, been ongoing, of and on, for years. Right now there's no engine in it, right front...

You need to go to the top of this page and click on 7173 Wiki and then download the wiring diagram for your car. You're going to need to...

You might try this company, likely not cheap, but will have the size you want https://thewheelsmith.net/

One other possibility is that your cable is slightly too long and when the housing nut is tightened up it is forcing the cable into a...

The standard size tires for 429 equipped Mustangs was F70-14s. F70-15 and F70-14 were also standard on Bosses and optional on most other...

Here are the latest versions of the spreadsheets, with some minor corrections and additions.

If you're looking for durability and ease of maintenance, as well as stock appearing, you can get a DuraSpark distributor and control...

It's a capacitor, and yes, they work for EMI caused by the ignition, generator/alternator, flasher, windshield wiper motor, and heater...

I had originally posted this in the general forum section. I made a couple of minor corrections and added a picture of the instrument...

Try this link on amazon. It is a pretty standard connecter HUSKY TOWING 30311 Connector 3-Way Flat Bul...

There was also a medium blue metallic on '72 Mustangs, paint code 3D.

You need a puller that will clamp around the groove on the pulley hub. This one should work...

With that camshaft your dynamic compression ratio is probably around 8:1, so that shouldn't be causing pinging. I don't have the cam...