Don C's latest activity

For a 351C the rocker arm to cylinder head fulcrum bolts should be torqued to 18-25 ft.lbs. 5 ft.lbs. is what the rocker arm cover...

One of the main causes of a differential seal leak is a problem in the differential, usually the pinion bearing going out or loose.

https://www.carid.com/motorcraft/starter-solenoid-mpn-sw7663.html?gclid=7f9f84d0c6411a93e51ee3e9d628f3d0&gclsrc=3p.ds&msclkid=7f9f84d0c64...

I'm ready to start on mine, replacing the brake and fuel lines, and have the materials setting in the shop. I'm using copper nickel on...

Good point, but any imperfection or dirt on the rim of the master cylinder will allow air (and moisture) in. Improperly storing bottles...

I thought I would take a look at historic prices. The prices of those valve covers in 1998 were $100 and $110, in 2020 they were both...

The vent hole in the cap is the culprit. Every time the atmospheric pressure or temperature changes the cap 'breathes'. Because regular...

Ford still sells valve covers for Clevelands in their Performance Parts Catalog. A little pricey, though, $350 for black and $425 for...

No, I just used 5/8-11 UNC grade B7 threaded rod. The ACME threads would be a good idea for one that would see frequent use. I don't...

You can build your own with the plans from Daze Cars: https://dazecars.com/dazed/spring.html I built mine with a longer threaded rod...

For those of you that have access to Animal Planet, the last part of this episode of Lone Star Law shows an investigation into a...

Production for 1971 vehicles ran roughly from August of 1970 through late July, 1971. What you describe sounds perfectly reasonable for...

You might try searching for rod clamps, that's the closest I can come up with.

That's my question, too. All of these cars came with cast iron exhaust manifolds.