giantpune's latest activity

Mine worked great, till today. Nothing else in the car changed. the tach just stopped working. Engine still runs. Is it possible...

I have the AVS2, model 1906 on a 302, 351C, 350 chevy, and a 429, with a mix of manual and automatic transmissions. Its electric choke...

You maybe could do it if you used a right angle drill like the milwaukee 2505. I've gotten that guy into some really tight spots before...

The malwood setup is only the master cylinder side of things. You can put whatever you want on the other end of the hydraulic line at...

I had one of those "welp, crap" moments the other day. I cranked the motor up and was letting it warm up a bit and revving it in the...

In the picture's its a single assembly with 2 vacuum hoses and a grommet. It pokes through about the top center of the firewall. One...

Its the vacuum actuated water valve. You dont want hot water cycling through the HVAC system when you have the AC trying to blow cold...

I've had mine in my car for a year and a half, daily driving it. So far, it has worked perfectly. I used an external slave cylinder on...

Any of the 2 part ones in the paint section at lowes or home depot will be strong. JB weld, gorilla, loctite all make some. The next...

I seem to remember a couple threads around here talking about the various aftermarket idler arms and discussing how wrong most of them...

Lares. https://www.summitracing.com/parts/LSC-12101 or https://www.summitracing.com/parts/lsc-12092 based on where the lines connect...

I think you might find the combination of your T5's 3.3ish 1st gear and your 3.5:1 rear end make your first gear pretty short. Like...

Not enough info to nail down a value. Does it run? What all's been done to it? Is it even still the original drivetrain? How's the...

If there's room. He put in a double row timing set. Some of those don't leave room for the oil slinger.

Ford also installed manual drum brakes and mono AM radios at the factory. Lets all rush out and get those, too. :D