Hemikiller's latest activity

The D1 in the casting number indicates that they were initially designed for the 1971 model year. That is not a hard and fast rule, as...

The cutoff date for the 1 pc to 2 pc changeover was 5/2/1972. If you're not certain of the actual date, vintage or originality of the...

The default failure position for the AC system is defrost. Before replacing any parts, you need to verify that there is vacuum going to...

Did the quote to do the needed work reach near the cost of a set of aluminum heads? A set of Edelbrocks or Trick Flows will be around...

The HEI needs a full 12V to run properly. The factory ignition lead ( Red w/Green stripe) only delivers ~7V. To diagnose a no-spark...

For shipping, Fastenal sends palletized items store to store on their Blue Lane Freight service. I sent a 3 speed and steering column...

The 351-2V engine only had a single exhaust, which was a Y-pipe from the exhaust manifolds into a single muffler and tailpipe on the...

You might be able to fix the relay you have. The internal contacts are likely burned or corroded, so if you desolder the ground...

On the 65-70 cars, that's correct, but it doesn't apply to a 71-73s. The 71-73 brake pedal pivot is in the same location on the support...

The other available header designed for the 71-73s is the Hooker 6921, which has the 2V head exhaust port size and shape. These may be a...

The painted Hooker 6915 headers are $300-ish on Summit. https://www.summitracing.com/parts/hok-6915hkr

Hooker Competition 6915 for the 4 barrel heads

Let's just say that many online stores leave a lot to be desired with their vehicle application search engine. This could be their...

Check these locations at the back of the block

@351mach1 @tommyjorgensen Your threads got caught in a mass spam delete I did this morning, a new user posted a bunch of junk. I must...