Paul M's latest activity

Ye the std eye 5 leafs don't raise it but @ 3/4" You'd probably get a better result with 1" lowered springs in the front and minimal...

You must have went with the stock replacement leafs. That's why I went with the 5 leaf. If you want 2" in height you'll have to raise it...

I've had 3 of them repaired now for @ 100.00. I bought the last one for my Q code used on Ebay for @ 75.00 knowing they would run...

That's good to know. I sent my 6AL in about fifteen years ago to repair damage caused by a faulty new out of the box voltage regulator...

I found the MSD 6AL ignition box was causing a parasitic drain of 40-50mA. I sent it to MSD to be repaired. They fixed it for $80.55. A...

Just picked up my first 70s mustang. I have a 68 X code but just picked up this beauty. 1973 fastback. Seems to be all original. Even...

The center part is concaved on the wheel. The wheel protrudes outward from the hub the more dish you have. This wheel at 9 1/2 fits...

I 1st rebuilt this front end using the 1" lowered spring which is also thicker, anyway I ended up adding the 3/8" polyurethane...

Or....someone might be able to cut it off a parts car and ship it to you...maybe like the one I have:

Once you get this together, (meaning assemble the brackets on the bumper) the rear bolt and nut plate assy will line up fine, however...

I'm gearing up to assemble a modified engine for my '71 Mach 1. The build up will include a handfull of mods which I can do at the shop...

I personally had to replace one. I couldn't find the repop on the part anywhere, so I got one from a doner car. Do not cut them out. Run...

Thanks everyone for the replies and advice. I'm hoping I don't have to sell it. It's a great car and fun to drive. I'll have to do more...

I approach the sales differently each time. I recently sold a 67 GTO. I actually held off a cpl o months till I got what I wanted. I had...

https://7173mustangs.com/media/albums/71-73-mustang-exhaust.102/