Recent content by rhigg1959

When I installed my HiPo bulbs, I still had issues with some of the bulbs not having good contact with the circuit board. I replaced the circuit board and bulb sockets and had the same issue. I actually had to adjust the bulbs as I installed them. By this I mean I could not twist them all in...

My 73 Q code doesn't have that.

I'm having a Classic Auto Air upgrade kit installed on the 22nd. I believe I will let the mechanic see what he can find. I did a quick look at the outside recirculating air motor, as it's easy to see, and the vacuum line going to it is red and it should be white. I would say the vacuum line...

Any idea what else to look for being it's still working backwards after installing this? Can it be a vacuum problem?

What I failed to say is, it's doing the same thing. Heat/Cool works in the opposite direction.

I installed the new water valve I purchased from Amazon. Nothing in the spec said if it was normally opened or closed. I can hold it up to the light and with the valve open, I can see light. When I push the vacuum lever, it closes and can see no light. Both the one I had and the new one from...

Just did, thanks.

That's exactly what I'm looking for.

I've been trying to find the fitting that goes from the passenger side breather hose to the air cleaner. Anyone know of an aftermarket one of these? It has a groove in the top that will lock it to the pcv air filter that comes throught the side of the air cleaner. Right now, my breather hose...

I appreciate the info. Didn't even think that could be the problem.

I appreciate the info. I decided to put the original valve covers back on which will eliminate the problem I'm having. That way everything will hook back up correctly. Benefit of keeping all my original parts I pulled off.

Stanglover what brand did you install? I don't see an option for the Long C bracket on any site I've be to.

I installed these. Same issue. If I have to be somewhere in a limited time, I have to leave about 15 minutes early to allow time to unlock the seat belts. :)

Thought about that. Thanks for advice.

Sorry I didn't see the link, The only place I can put this is where the PVC valve is located.