Recent content by Rumbloki

Flat hydro

Finally getting close to starting the '73. My plan is to start is with 26* BTDC, adjust with vacuum gauge, and take it to 2600 RPM for 15 minutes. The build is a 351C, DOAE heads, 11:1, Lunati Bracket Master II hydro 290/300, Lift .536/.562, Speed Demon 750, RPM Air Gap, Hookers, 2.5" Pypes...

I've seen Dynacorn for $369, Sherman for $281, and Goodmark for $240. I just want the fender that has good lines. Do they all "include the stamped steel panel found behind the front fender extensions"?

How do '73 fenders fit this scenario? Goodmark is $80 cheaper per side. Are they trash?

Pypes 2.5" all the way. Great fit. Bought 15* mandrel bent pieces to mate with the Hookers.

Thanks. Got any pictures? From a low angle would be great.

Anyone using this bracket? What air cleaner are you using? How much drop on the air cleaner base?

After trying a reman '73 pump that hit the shock tower, I started looking into the Saginaw pump. I have a 351c with '70 heads. Was thinking something for a Torino or Cougar would work. Return line close to block would help. What's the best year/make/model pump to search for? Thanks, Alton...

After trying a reman '73 pump that hit the shock tower, I started looking into the Saginaw pump. What's the best year/make/model pump to search for? I have a 351c with '70 heads. Thanks, Alton

Thank you, guys.

My son rubbed his door on his 2012 Mustang going into the garage. What is the best way to remove the house paint without causing damage to his car? Thanks

$200 plus shipping

Summit wheels, glass, Hooker headers, Pypes exhaust, brakes, Demon 750, and Holley Blue fuel system are done. Adaptor made from 1/4" aluminum. I will likely go back and add Russell fuel line all the way.

I went with Pypes SFM04S - System with Street Pro Mufflers. I un-staggered the shocks. Fit is perfect. Tailpipes are long so you can trim them to fit whatever tips you want. Lots of pipe up front so you can trim to fit different headers. I have Hookers btw.

Just ordered the one for manual tranny. https://www.dbelectrical.com/p-11368-new-ford-mini-pmgr-starter-302-351-manual-transmissions-3223-sfd0012.aspx Thanks for the post. You saved me $150 over the one I was going to get from Summit.