Zach

None of the other holes along the aprons are factory which may be the case, previous owner redid the entire engine bay and only drilled...

Spent some time getting one of the braces on today, just want to check and see if you guys agree the fit is right, I had nothing to base...

Minnesota here, I just take the battery inside and let the car sit in the garage with a cover. Normally I'd start it every few weeks but...

Zach, concerning your above comment: "can’t have a mustang that’s running better than our pontiacs" Our forum by-laws CLEARLY STATE...

Appreciate the responses, guess it comes down to how long the winter lasts here. I’ve done so much cutting and welding that I know where...

Howdy, been making steady progress, interior is completely solid now, finishing up engine bay, after that its just the tail light panel...

My guess is his choke is permanently closed during operation if his choke isn’t hooked up, the spring in the housing cant heat up with...

Rereading this post not half asleep, gonna have to say the choke is the culprit here. I’m unsure how Holley does it but either your...

You said the choke isn’t hooked up yet, is it possible the secondaries are locked up and you are only running on the primary bores...

Remember to disconnect vac line and plug the vacuum advance when setting initial. I am unsure how stock mustangs run vac but there is a...

Sounds like too much timing. I believe you tap into vacuum advance once you get to highway speeds and that could be pushing you over. If...

Howdy. Been working on the mustang and want to finish up the engine bay. One of the last things I need is to drill out the fender...

Howdy, I am getting pretty close to finishing up all metal work within the engine bay as well as the interior and I am trying to plan...

Good thing about mine being completely disassembled is it doesn’t hurt to take away or do anything to it. If mine was similar to yours...

Been a while since I updated. Been busy with college haven’t had much time except for the last two weeks. Also not the best at keeping...