Search results

Just went through this; http://www.7173mustangs.com/thread-engine-won-t-stop-starting So there is a copper plated disc that connects the two sides of the solenoid and gives the starter AND the coil current when activated. What happens is the disc "welds itself stuck there" and the starter...

Agreed I like too! Would be a good daily driver for the wife with a 440 six-pak. Paul

:goodpost: :thankyouyellow: Paul

Click on his user name and select "PM User" Paul

Agreed! Rough ride with 18's and low profile tires... rides like a brick. Car was designed to have big spongy donuts on it! :thankyouyellow::goodpost: Paul

Yes on the grease I had trouble stabbing the dizzy because the shaft was leaning off-center. :goodpost:

Those cheap chrome housings come with an oring but even using a gasket is a fail and will leak ask me how I know. Get a cast iron housing and use a gasket. Paul

:goodpost: TYVM I needed that

Snug is a good word to use. From the center outwards evenly. I am a fan of cork gaskets and no sealer however I use studs and nuts as apposed to bolts. Over-tightening will lead to leaks so less is more. It's only a valve cover and not a main cap let's not stress on this. Paul

I think my research revealed neg 1/4D was ideal 1/2D would be OK. You can get 6 positions out of your lower lock bolt kit **IF** you flip the washers over according to instructions. I run stock eccentrics on all the fords I ever had and never had one slip however I don't road race the cars...

Glad yer BaCk! Keep the photos coming Paul EDIT: Oh and welcome from CA! I love that button

There are six positions to choose from. What Camber can they get near zero or minus with them? EQUAL BOTH SIDES! Paul

SweeT! I would like to see the build thread 4 sure

WAY COOL! Welcome from CA!

The frame you have is missing the lid. You need the tray part also. Hit up Don at OMS Paul

Copy That! Now we need to know the condition of the engine. On a older engine I would be looking at the compression/valve train. Tests are in order and a visual on valve train. reminds me of a flat cam guessing here 4 sure Paul

Use the sale money and get a compressor and a couple impact guns. Money well spent IMO Good luck with the sale! Paul Really proud of you Liz! Wish my better half could help me out but she just does the shotgun thing :D

The definition of "cuts out" needs to be explained IMO

Very entertaining looks good!

I'm always late. How to jump a car: