Search results

Wanted to Buy 71 drivers electric window bezel clips x2 Can anyone help me with a couple of these clips and dont mind sending to New Zealand at my cost ??🙏

Thanks John , I will keep an eye on that but so far so good down here in New Zealand(y)

Hi Ponypastor I have just fitted a 750 Holley and definitely no issues with performance.One hint ,Reverse the fuel bowl feed pipe and bring your fuel line around the back of the carb. I did this because the original 780 had the fuel feed on the drivers side and using a 750 with fuel feed on...

Thanks again guys . Since I have started this spring thing I have decided to renew both ends with new shocks and springs. Eaton Detroit Springs are so helpful and can supply me with a complete set up so I will work some heights out with the help of Don C`s chart (thanks Don ) and contact them...

Thanks Geoff Great video , he knows his stuff. I was looking locally because every time I buy something out out the US I get a new bum bored with the freight costs (eye wateringly painful ) Has anybody got a set of uncut 429 front springs lying around that can be measured for me to see how...

Thanks for that guys. I removed one of the front springs last night and sure enough it has been cut and the top arm has been hammering the bump stop The only springs I can compare to is a pair out of my 69 .Same height as a 71 but different wire thickness to the 429 and it looks like mine have a...

Hi All , I want to put a set of upgrade performance shocks on my 71 SCJ.I think the front and rear have been lowered about 2.5 - 3.0 in (hard to judge as I dont have anything to compare with ).I am having the odd bottom out issue in the front and been looking at QA1 adjustable and want to know...

Thanks all Have found a pair (mine were broken ) and they are right or left with the flange up one side and down the other but now need to find the correct 5/8 bar?

Can anyone tell me if the rear sway bar mount plates are an opposite pair or are they the same pressed plate flipped for the opposite side.

Thanks Guys, It is perished so I will replace it with the shorter hose or get a new hose made with my existing ends and I will replace the cooler which is missing.. ::thumb:: Luv this Site !!!

Can anyone tell me why my 71 J Code has an extra long power steering return hose which is doubled up through a bracket on the drivers side tower brace. I have found a photo on the net of another similar but A/C car.Mine is Drag Pack so no A/C

Thanks PKJ Im up north in Whangarei.  Hope ya bringing your car when you come back home !

Thanks All I appreciate the help here as I am sick of trying to modify repro parts to fit but sounds good about the tank. I will price a new tank with Rock as I have dealt with them in the past and they are great. Where do I get a "Dorman 692232" sender ? I will tell you how bad the freight...

Does anyone have any ideas on cleaning out a gas tank.??? I have removed it and it has a rusty looking coating inside and what looks like a white powder you would relate to zinc coating deterioration.I am very loathed to replace it due to past experiences with repro parts. Is there a chemical...

Thanks Guys checked all bulbs and replaced Flasher unit...no go.I then pulled the steering wheel and sprayed a contact cleaner the rinse on turn signal switch , dried with air and YEP success  Thanks for your help :thankyouyellow:

Having trouble with my turn signals on my 71 J code ,they dont flash just stay on. I have replaced the flasher unit and tested the voltage at the bulbs and am getting full voltage but not pulsing ?? Anyone out there had this issue ? Thnx Roger

Thanks Mike Hope your staying in the shed with your Stang ? from what I see on the news New York is getting hammered with the virus! Roger

Cheers Mike , first Forum I have been on so a lot of browsing to do.