Search results

This post has good timing my speedo started acting up the other day the odometer seems to be fine but the needle sometimes has a mind of its own. It buried its self one time and it wildly fluctuate while holding a steady speed. I tried reaching up under the dash to make sure it fully snapped in...

You can call it what you want put it is NOS that so called patina you can’t even feel it with your hand it is as smooth as the primer. It never has been used it is old and it is stock. 🤷🏻‍♂️

Nice 71-72 Nos left side front fender. Located just east of Nashville Tennessee 400

Nice slightly used 850 carb I had set up for my 408 with the kick down mechanism. Just went back to a vacuum secondary carbs for better gas mileage. Details in the pics. 450 plus shipping

Anyone know if this a Mustang radiator and shroud? Rad I’d D1ZE GA the shroud is D0OE 8146 C Thanks

https://www.427garage.com/vehicles/578/1989-ford-mustang-25th-anniversary-only-2-300mls This Fox looked like new. Wish the place was open.

Took it on a 80 mile round trip in 100 degree heat to go see a really cool place in Carthage TN. 427 Garage. If you are ever in the middle TN area it’s a cool place to see and Carthage is in some nice country. The old girl just cruises and ran great. She likes to stretch her legs for sure. It...

Maybe disconnect the exhaust at the headers and see how it runs 🤷🏻‍♂️

Pic of the tail pipes? Is it possible any packing material could of been in one of or both pipes and plugged the system up?

Like others have said. I would get a set of wheels and tires to eliminate the inconsistency of traction. Switch them when you get there. But be prepared for possible breakage 😂 I remember the first time trying slicks I was shocked. When I did my first little hop out of the water box the tires...

I’d run fat and skinnies if I had some Welds on it or even Cragars. 😊

It says it’s 27 inches tall so it’s about the same as a 225/70. What is your back spacing? Thanks

Nice car! And your daughter has the proper swag on. Also know as drip 😂

Yes this economy is rock’in 😡 🤐

I totally agree but like you I can’t see paying 400 a piece for a bias ply tire. I even looked at buying some N 50’s 😊

I’m thinking of changing my front tires from a 235/60 to a 225/70. Because I think the 235/60 is to short looking. I have 275/60 on the back and they are 28 inches. The 235/60 is 26.1 and the 225/70 is 27.4 I know if the tire gets too tall it can hit the frame when the wheel is turned all the...

Since we are on the subject of tires I’m thinking of changing my front tires from a 235/60 to a 225/70. Because I think the 235/60 is to short looking. I have 275/60 on the back and they are 28 inches. The 235/60 is 26.1 and the 225/70 is 27.4 I know if the tire gets too tall it can hit the...

The Cobras have changed a lot over tens year’s cosmetically they have a big Cobra snake 🐍 on the side wall now.

I compared my new Eatons to the originals side by side. They were the exact same height and I measured the coil with a caliper and the wire was the same diameter. I’m no metallurgist so I don’t know if there is stronger and weaker spring steel wire. 🤷🏻‍♂️ All I know I ordered the correct spring...

The Goodyear Eagles were a great looking tire.