Search results

72 &1/2 H code, somebody added a bunch of 73 parts,******* people!

Hello, yeah you could do all that, those 5.25 wont fit on the driverside kick panel,the E-brake would get hung up on the speaker grill. you can put them in the door though. i just put in a set. in hind sight i could have gone with 4x8's. the door is a better location,more rigid,better sound...

When you do this install, make sure to get new carrier nuts and washers,the copper washers are part of the seal. when you pull the axles make sure they just dont lay there on the seals or you can damage them causing them to leak. in fact it's a good time to pull them and inspect the...

Those plastic milk crates work well for that. on the 28 to 31 conversion, what you mentioned is the cheap part, the axles on the other hand,,,, you may want to upgrade the yoke for bigger joints. I've got a 78 F-150 parts truck with a 31 spline set up, been thinking about pulling it out and...

Hello, did the axle have a differential tag, is it a 9" diff housing? if it is it may be a 8.75". 8"-9" pumpkins look very similar. what the guys are saying about options availability is true, you could get a 8" axle for the 71-73 but usually for V-6, 302. but with a gas crunch on anything was...

mustangtek.com lists these heads for 71 also, although they carry a single A suffix, it's hard to believe that these 72 heads would have gone through that many changes to have a AA suffix, but you can never tell, they do exist though. For a grand I would like to have them. I wonder if he would...

Found these this morning, 1972 boss 302 Service Repacement Heads still in box. D1ZE-6090-AA you dont see these very often,let alone new. item# 230798400381, starting bid $1.000.00 Listed as "1971 Boss 302 mustang heads" Wish i had a boss block, and not the boss wife.:dodgy:

You Guy's will not be dissapointed. There is more factual info then you will find anywhere. It also establishes the origin of "core shift" the different foundry process between here and australia, the metalurgy and actual block counts,run numbers, and reasons why this block was concieved and...

A great addition to any collection.

The last decade of winters were very mild, like a PA winter. Only used the snow blower once last year. if this is global warming,bring it on. Drum is up too 3 brigades now,4 with a reserve round out brigade. each of these units are self sufficient with their own aircraft,arty,etc. new post has...

I was stationed at Drum from 88-91, Moved back to Grand Rapids, Michigan in 93, Moved back to Watertown in 95.

this is what you may have to do to get the door lookind straight. just what i wanted, another project.

Maybe call National Parts Depot and see what they have, my 72 has a flat style on the right and the hub style on the left. I think my car is a 1972 & 1/2. when i head out to the garage i'll look in their catolog and write back if i see anything good.

I believe the spring plates are the same, Ive got a 70 set on my 72 9" right now with 4 degree wedges.

When you do get it running,check for vacuum leaks around the manifold. I assume you cleaned those plugs up well and checked to see if they are wet or dry after turning it over a few times.Also this crap gas they sell these days is hard on rubber and plastic,the ethanol dries things up over time...

Could you please make mine with brass knuckles and a spiked hilt? thanks

More like,YUUUUUCCCCKKKKK. the full size chevelle was ugly as hell what makes them think a mid-size retro will look any better? Ford should take the chance and make a retro 71-73 while they retool for the next generation mustang because the 2005-present is getting old, I just rest my eyes when...