Search results

What are the thoughts about spacers? I’ve never used them,

I have an opportunity to pick up a set of 2004 40th annfversary five spoke Mustang wheels 16 inch 30 mm offset and I believe a 5.5 inch backspacing, the wheels are 7 1/2 inches wide. Will these fit without adapters on a 73 vert And have enough clearance both front and back?

‘73 vert - I’m having carb issues and my mechanic suggested switching to an edelbrock. I have a 361c with cc heads blue thunder intake, a mild cam and headers putting out about 400 hp on the dynamo. T5 Z spec (0.58 overdrive in 5th) and a 4.11 rear. 8don’t know the cam specs or compression ratio...

Do you have a courtesy light switch the push button in the door jamb?

During the car’s restoration the push switch in the driver’s door jamb for the interior lights got broken, does anyone have a good one for sale at a reasonable price?

Still available? How much is shipping to 11746?

If these are still available I can use them, I am in Huntington Station, ny 11746. Let me know how much to ship by whatever manner is most convenient for you

I have a set of original white deluxe seats in good condition except the seam between the comfort weave and the white vinyl has separated along the piping on the right side of the base on both seats. My body shop says it would make the most sense to replace the small right panel (rather than...

The doors have a lot of rot on the bottoms, and the fenders are rotted through at the bottoms behind the wheels, unfortunately nobody seems to make patch panels for these anymore. We were able to repair the rot on the rear quarters and inner rears, needed to replace the trunk floor and repair...

You guys just don't appreciate the "sleeper" mystique about it. Pulling up to it at a light, you might think it's a basic 6 cyl car and be fooled when it vibrates off with the cutouts open....

Finally getting to the end of rust/corrosion repai, removal and restoration. Does anyone have decent (read rust, corrosion, major dent free) doors or front ‘73 fenders they are willing to sell at a reasonable price? I am in Huntington, NY and will need to arrange to either pick them up or have...

Do you have both door panels? if so I want them and the rear bumper

Started taking care of rust and both torque boxes have a reasonable degree of rust/corrosion. Body shop feels one MUST be replaced, but once it is that far apart it pays to do both and be done with it. Are the torque boxes reproduced or do I need to try and find usable originals (and if so, any...

I did, couldn't get it tuned right, after many attempts and changing parts took it off. Still have it in my garage, nearly new, if anyone wants one

Me too, if a second set becomes available

how much to ship conv window weatherstrips to 11746?

How much for Window switch and condole top bezel shipped to 11746 Also how much additional for hinges?

Thanks I’ll check, do you have a diagram of what each of the 6 pins in the passenger door switch are attached to and polarity?

Suddenly my passenger power window stopped going up fully. it goes 1/2 way and then starts clicking and won’t go further. If I run the motor a few more seconds I can pull the window up and it stays closed. Any thoughts or suggestions? Additionally, the passenger window switch is not working at...

Me too