Search results

No problems https://www.malwoodusa.com/ They make them model specific.

It was perfect very tight no mods at all,

Today this piece arrived all in one :)

Okay so far RAM Hydraulics is my choice here. Measure properly for the shims. Its in some minor fixes and cutting bolts that are to long.

Bellhousing dialed in and clutch, pressure plate and flywheel torqued down. The powermaster starter works with both 157 and 164 flywheel/pressure plates. Got lucky there :) Ford Motorsport needle bearing is also punched in.

Sure will do Fabrice , and thanks.

Yes after 2 seasons with the the 4r70w its going out, sold already. So I got a hold of a TKO500 a few weeks ago. Changed the sync to carbonrings, forkpads, inputshaft bearing etc. Did an overhaul and now its back together. Picture of the install will come :-) The 4r70w Performed perfect I just...

Just quick reminder when installing the GW connectors the car should be resting on the wheels, rear wheels can be removed when welding. Just put something under the axle.

Hi Has anyone installed this. A bit pricey but looks easy.

No you can use the stock 164th 28oz (351c), usually there is various pattern for the converter. The stock converter bolted right up to same flexplate as the FMX.

That is great info, Thanks :-)

Hi Anyone having the TKO 500 or 600 installed that knows if the stock back position is putting the shifter in a good spot ?

The Tim Myer kit loks good, each kit seems to be custom made.

Good Question I Think I have somewhere around 400-420 hp now. 351c 30 over Howard Roller cam with Lifters, Howard Roller rockers, 2v CHI Heads, compression is 10:1 . Edelbrock Airgap and Hooker competition headers. Holley Terminator stealth with RAM Air on top :-) camshaft details ...

Im thinking over forged r not forged crank ? Is Cast enough ?

Thanks :-) Do you have the part nr for that kit ? Did you use 3 cc dish pistons ? I heard about that the make good stuff 

Hi Im taking that route this winter, but which kit do you recommend ? Heads are 2v CHI heads with 65cc chamber. Would be nice if it can be ordered directly from Summit. Scat ? Eagle ? etc.  What Is your experience? Daily driver with some extra power :-)

Super thanks all, it works now thanks :-)

I can add that the switch is a bit strange, if a wiggle it a bit between low and high I can make the wipers stop. Has it gone bad ?

Thanks, but I dont have the orginal harness installed.  So I need to now how to connect it from scratch without the original harness. Ground , battery etc.