Search results

I dont think so. That one he was selling is from the 351M or 351C. I have a 351W. Do you know for a fact if they are interchangeable?

Distributor Identification- Good morning fellow mach enthusiasts. Getting extremely close to firing up the 72 but need some assistance. This distributor came with the 351W i purchased but previous owner said engine ran bad(Engine has had a complete overhaul since Ive purchased). Im wondering if...

I was able to locate the correct shift shaft lever but found a new problem. Are all C6 transmissions the same size? I am currently only able to keep the car in park and shift into reverse before the lever hits the side of the transmission. Using a spacer/washer is out of the question I believe...

Ok- So I was able to take some more pics to help. Does any one know what goes to these three connectors located above glove compartment (Image 6557)? Ive attached other pics to show the wire colors. I took another photo of the orange wire w/ black stripe that the packrat chewed through(Image...

Plus one on this. A pillars for sure!!!

Hello fellow enthusiasts. Working out the electrical components in my 72 mach 1 and was hoping to get some assistance. Fortunately the pack rats didnt do too much damage at the previous owners residence. Image 6445 and 6446 is directly behind the gauge cluster and I cant seem to find where it...

Just came across this on mine. I was not getting any lights in my cluster and upon removing the instrument cluster, I noticed the previous owner had clipped this ribbon.

Thank you Hemikiller. I really appreciate the help. In the link you sent for the lever shift shaft, there is only one connecting point(I'm thinking the shifter rod connects to that). But then how do I go about connecting the steering column lock rod and kick down rod to the lever shift shaft...

Thank you for that information! I will be looking first thing in the morning :)

I have a 72 mach 1 that i bought years back with no tranny and no engine. Finally getting around to piecing it together. Bought a 351w and c6 tranny from a (1980s) f150/bronco. I have some questions about the tranny linkage and I cant figure it out. The first pic (image 5705) is what i have. The...

Is this driver side or passenger side?

Pm me if you happen to make some please

Do you have one for a 72 Mach one still available?

I am looking for the center support bracket as well as the 2 grill support brackets. Any help is greatly appreciated!!