Search results

Yes.. The trans amis my next project

need photos of how the shoulder harness was meant to be stowed. Can anyone provide me with a few with detail? Thank you.

1971 Mach 1 M Code 4 speed

Over three years ago after completing the drive train mechanical rebuilds I was ready to sell my 71 because I knew if i kept her I could not just leave the body and paint alone. You see I had done a rotisserie restoration of my 1968 Fastback some 12 years earlier and it came out so nice that the...

can anyone post a few photos of the correct way to attach the original shoulder strap seat belt above the window and the parts necessary for this. Thank you

Does anyone know what the official name and purpose of these are? I am assuming they are stops for the hood when opening or closing. Also did they originally have a protective plastic or rubber piece on the top? Anyone? Thanks

Hope this helps anyone about to install stripes on their 71-73 Mach 1. I sure could have used this. Good luck.

Well after three years of working on my 71 Mach 1 I'm actually ready for final paint. Can some one post some detailed photos of where the lower blackout meets the color and where the black meets the color around the cowl area. Just want to make sure I get this right. Thanks a ton!

Mike, Thanks so much. Mine seems to hang over at least 1/2" on each side and I can't figure it out.

Sorry. It's a 71 Mach with urethane.

Can anyone post a few photos of what a properly fitted bumper looks like at the fender extensions, particularly how much overhang it has? Thanks. This is a 1971 with urethane bumper. Thanks

Sorry it's a 71 mach 1 M code. and Thanks!

Sorry it's a 71 mach 1 M code.

Can someone post a few reference photos of the engine compartment as it should be concerning the stater solenoid, capacitor, and regulator locations. Thanks

Can anyone steer me towards the proper power steering hoses and where the best place is to get them. The pressure hose on my car has a female sae 3/8 connector that connects directly to the hem pump. Every time I order one for the 71 they send me one with a female inverted flare connection. NOT...

Thanks for the input Geoff!

I was going to do the same, but after removing the original large pin it was too short because the lares base plate was actually thicker than the original. BTW good luck trying to get in touch with anyone at Scott Drake. They're customer service is nonexistent.