Search results

I can vouch for Dennis as well. Bought a bunch of FE parts from him moons ago when I was restoring the 68 fastback. He is the real deal.

Super cool, especially if your initials are DGS. :cool:

I have the harness and an alternator. Not sure if this is what you need. Came off my 71.

I run an 18" US Mag. It is not the rambler however...

Thanks for the responses so far... Super weird to me. Never experienced this in any install I have ever done. 351C - Wiring is all new. The only OEM wiring I used was the power to the head unit. I will try what others have suggested.

So I have installed a full aftermarket stereo in my son's 71. Alpine head unit. Alpine 5 channel amp, Rockford fosgate 5" components in the doors, 6x9's in the rear deck, and a 12" sub in the trunk. Power is ran fused from the battery to the trunk with 2ga wire and the ground for the amp is 2ga...

I installed a CCA kit in our 71. I didn't like the CCA Sanden compressor mount as it utilized a super long belt for the AC compressor and alternator on the 2nd grove of the crank pully. Ended up buying a Vintage Air compressor mount which works much better. It utilizes the front grove on the 3...

Have a set of 3 point seatbelts. Used for a very short while. Black. Forget which brand, hit me up if interested and i'll climb in the attic and look. $85 to your door in the lower 48. Also have the interior portion of the HVAC for a 71 factory A/C car. Box, controls, vacuum block, ducts...

You can have both of them for the price of shipping. Message me your address and I will get that figured out.

Like these?

I did this conversion during the re-build. 351C mated to a Tremec 5 speed.

One is wired into the Holley temp sensor and comes on at 192* The other is wired into the Holley A/C trigger and runs full time anytime the A/C is turned on. With the A/C off, the single fan is plenty. Each fan draws about 20 amps and yes, you can hear them. They sound comparable to any of the...

Derale 16927 - Contains 2-12" Spal fans attached to a stock radiator. Controlled by the Sniper. Consistently at 192* with or without the A/C running or in traffic.

Message sent for the headliner

Assume you are going back with the stock York compressor?

vintageair.com

47 views and no replies... :) Circling back for anyone else that may have this question. I was able to resolve with a mounting bracket from Vintage air. they make a bracket specific for a 351C to mount a Sanden compressor.

Yes, the CCA kit is super nice. @71coop - I wish the controls were a little more vintage as well. However, I installed a double DIN touchscreen stereo so it doesn't look too bad. @rmowery - My cowl was rusted at this spot so I took the opportunity to weld up the intake. Do kinda miss the fresh...

Hello all - Seems these are like finding unicorns. Last year, I installed a Classic Auto Air system in my son's 71/351C. It came with the Sanden compressor and a retrofit bracket to install which I thought was good since all of the original stuff was missing. Problem is, the mount does not use...

I have an A/C heater box as well as the controls from a 71. It is basically the interior side of the firewall. I would let you have it for the price of shipping. It will need some clean up and a little work.