kcmash

This company took a pic of my car when I stopped by. They use this as an advertisement now.

Can any of you experienced painters tell me how much base coat is needed for a 71 Urethane bumper? I have a partial can, maybe half a...

Interesting on Grabber Blue. Mine is an original Grabber Blue/Argent 71 Mach 1. Paint code is J. The same Paint color code of J was...

Replacing the lower shaft and the rag joint with a non-tilt lower will work with no issues. I have confirmed that with a tilt column...

I had a friend who had an original back in the early 80's. It had the Mach 1 hood in all white, no contrasting colors. The Flat hoods...

Today? I drove it like I stole it! Sunny and 70 in KC, so I couldn't resist.

Looks like it to me! Not sure if the tip was originally solid, or had a counterbore. Let me know how much per piece when you are done.

Here ae the rivet dimensions that I was able to get.

Vikingsandpintos you are correct. You can change out the lower shaft and use a standard rag joint. Another option is to change to a...

So I used the Lares kit with just the rubber disk in it to do my rebuild. Here are the problems. 1) The Rag joint listed for sale from...

The Argent on the outer ring is correct for original.

I missed the boat. I finally got everything approved on my end, the wife said yes, I picked up the phone to tell the guy I would take...

This is an interesting area for discussion. I put NOS stripes on my car when I restored. I found that the Ford parts had the backing...

That is a Grabber Blue Mach. Looks a lot like mine exept for the console clock.

I spray with purple power, scrub with a push broom and rinse.